Description
Precision Screwless Sine Vise
- Provides a quick and accurate means of holding a workpiece at an angle for machining, drilling and grinding
- Accuracy is further enhanced by the fact that the center, distance between the holes is held within 0.0002"
- Small angles can be set easily and accurately by using standard gauge block sets because of the built-in 0.200" minute steps ( the distance between the center of the rolls and the top of the vise changes by 0.200" for every 1 degree of angle)
- Made of hardened solid steel
- All surfaces hardened and ground.
- Adjusts 0-45°
- Square and parallel within 0.0002"
- The material of the precision angle plate are:
- 20CrMnTi ( C:0.17-0.23; Si: 0.17-0.37; Mn:0.8-1.1; Cr: 1.00-1.30; Ti: 0.04-0.10)
Item |
Dimension L x W x H |
Center Distance of Rolls | Sq. & Parallel | Jaw Capacity | Jaw Height |
BA66-0420 | 7.48"x2.87"x4.13" | 5.000" within 0.0002" | 0.0002" | 0-3.94" |
1.38" |
BA66-0425 | 9.65"x3.94"x5" | 10.000 within 0.0002" | 0.0003" | 0-5.12" | 1.77" |