California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
The SDS 16 Small Drill Sharpener provides a valuable return on investment to any shop with dull small drill bits. Adding this sharpener to your shop will immediately decrease your spending on new tools. The SDS Small Drill Sharpener is easy to use, has a small foot print and a heavy-duty construction for industrial tool sharpening. It allows you to create center cutting end geometry so that a pilot hole is not needed. The machine comes with a 400 grit wheel. There are optional 800 grit wheels and polishing wheels.
These drill grinders are not the look-alike grinders that can be found on eBay and Alibaba. Cuttermasters grinders are tested in North America, CE approved and covered by our manufacturer’s warrantee. The wheels are the bottom line, if the wheels are no good the machine is no good. Our wheels are produced using General Electric abrasive media under strict conditions to ensure long life and in some cases are designed by Cuttermasters in North America.
- Precision assurance within 0.02mm
- Creates center cutting geometry
- High accuracy balance of tip geometry
- Easy to operate, grinding tools within 1 minute
- High accuracy steel alloy collets
- High efficiency DC motor
- Industrial quality GE grinding wheel
- Portable
The SDS Small Drill Sharpener is a one of a kind. Sharpens drills sized from .03″ to.250 diameter, two and three flute drills. ( Point splits down to .03)
Specifications
SDS-16 Collet sizes:
|
| Drill Diameter | 0.03″ to .250 |
| Power Supply | AC 110V 50/60Hz, AC 220V(Opt.) |
| R.P.M of Motor | 5300 |
| Grinding Wheel | 400 grit |
| Weight | N.W 9.7Kg G.W 15.7Kg |
| Machine Size | L 300mm, W 165mm, H 245mm |
| Packing Size | L 380mm W 245mm, H 325mm |
| Standard Accessories | Discharged collet : 1.0 / 1.2 / 1.4 / 1.6 / 2.0 / 2.2 / 2.4 / 2.8 / 3.5 Standard : 4.5 / 6.0 / 6.5Bushings x 6 pcsChuck Set: 2 sets
Hexagon Wrench 3mm x 1pcs / 4mm x 1 pcs * Optional Grinding Wheel CBN or Diamond, 400 or 800 grit |
