TRADESMAN MACHINIST END MILL WORKSTATION
-
Neck relief / tool shank diameter reduction
-
Weldon set screw flats
-
Carbide cut off
-
Corner chamfer
-
This package includes your choice of grinding wheel (choose from drop down menu above)
California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
SCROLL DOWN TO READ MORE ABOUT OUR PRECISION PLATED CBN AND DIAMOND GRINDING WHEEL CHOICES AND TRADESMAN MACHINIST OPERATIONS
Cuttermasters Precision Plated CBN and Diamond Grinding Wheels are balanced and always flat, so no extra grinding dust. When you use the Tradesman Grinder with it’s DC motor you find you can grind heavy cuts, at below 1000 rpm, keeping the grinding process cool and quiet. If you want to put a .005 radius/chamfer on something, you can hear when the tool contacts the wheel.
NECK REDUCTION AND T-CUTTER CREATION
Neck reduction: This often needed grind is quick and easy with the Tradesman Machinist T-ER32i Neck Grinding Attachment and one of our diamond plated Shoulder Wheels. This same set up is perfect for creating your own T-cutter out of a standard end mill with our CBN Shoulder Wheels.
WELDON SET SCREW FLATS
The tool you need for a job may not have an important feature: the set screw flat. Quickly add a perfect set screw flat or Weldon flat using the T-ER32 Neck Grinding Attachment and one of our Chamfer Wheels. This same set up is perfect for reducing the neck diameter of your CBN and carbide tools. However you may prefer one of our Shoulder Wheels for neck diameter relief / reduction as there is no chamfer which allows for closer approach to the collet chuck.
CARBIDE CUT OFF
Cut off your carbide tools with our Diamond Resin Bond Cut Off Wheel or our Diamond Plated Cut Off Wheel. The resin bond wheel will cut more tools while the plated wheel will cut faster. Use the T-ER32 tool holder or V-block tool holder
CORNER CHAMFER
Use our chamfer wheels to sharpen tools, like reamers, by indexing around to each flute. This requires the indexing version of the T-ER32 Tool Holder so add the T-ER32 (upgrade) to this package for that option. As this operation uses the side of the wheel the precision shaft option is also required
RADIUS GRINDING
Grind rads quickly and easily with our Profiled Radius Wheels. Grind .02″, .03″, .04″, .06″, .09″ and .12″ corner rads. Our T-ER-32i Neck Grinding Attachment indexes to flute positions for 2, 3, 4, 6 and 8 flute end mills and allows you to plunge grind a radius (YouTube video).
The Tradesman Machinist is probably the highest accuracy grinder in its class. Still, the precision required to achieve a good corner radius demands that the motor tolerances are tighter than usual so a motor with this additional accuracy is required at the time of purchase if intended for corner rads.
