California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
-
Ultrasonic Portable Hardness Tester Non-Destructive!/Portable Rockwell Hardness Tester/Ultrasonic Portable Hardness Tester
Model No. PHT-6001 | Part of the PHT-6000 Series
Features
Latest portable hardness tester technology. Utilizes both ultrasonic and dynamic type portable hardness testers in one unit. Can test non-destructive and handle small or thin work parts down to 2mm of thickness, as well as testing large parts. Extremely versatile, with many options and configurations to handle all types of hardness tester applications.
w/ Manual Probe w/ Motorized Probe w/ LEEB Impact Device w/ Extended Manual Probe Features:
- Non-Destructive hand held hardness tester
- Combines UCI and Leeb hardness testing in one state of the art device
- Test steel with min thickness of .08” and unlimited max thickness
- Blazing fast test results
- Rockwell, Brinell Vickers conversions shown on display
- Large Memory w/USB Output
- Choice of manual UCI probes; 1kg, 2kg, 5kg & 10kg
- Optional Motorized Probes: .30kg, .80kg, & 1kgf
- Available Impact Devices(Leeb) D, DC, D+15, G & DL
“Ultrasonic Contact Impedance” is based on a 136 degree diamond at the end of a vibrating rod being depressed into the test surface at a fixed load. The difference in Ultrasonic vibration frequency is then calculated into a hardness value. The UCI hardness test procedure is slower than the Dynamic Impact style, however the “UCI” method of hardness testing is portable, easy and accurate. It also has its own advantages when utilized for certain hardness testing applications. UCI hardness testers are not restricted to large mass items like dynamic type testers. These hardness testers can test metals as thin as 2mm and at a hardness value as low as 20HRC (75HB). They also excel at performing hardness tests on larger, harder metals as well. Another reason for the rise in popularity is due to the fact that the UCI method is categorized as “Non-Destructive”. That translates into less scrap parts/ lower mfg costs due to necessary inspections.
“Dynamic Impact” is based on the Leeb principle of hardness developed by Dietmar Leeb in the 1970’s. A spring loaded impact body is thrust to the test surface, effecting rebound. The speed of both the initial thrust and the rebound is measured in a non-contact mode. This is calculated as a Leeb hardness value and then automatically converted to Rockwell C, B, Brinell, Vickers and Shore hardness Values. It has effectually brought easy, fast and accurate results to portable hardness testing.
UCI
Scales-UCI Measurement Range Rockwell C 20-70 HRC Rockwell B 41-99 HRB Rockwell A 61-85 HRB Brinell
76-618 HB
Vickers 80-1599 HV Can also test in the following scales(UCI only) HRN15 – HRN30 – HRN45 – HRT15 – HRT30 – HRT45 HRF – HK – HD.
LEEB
Scales-UCI Measurement Range Rockwell C 25-67 HRC Rockwell B 59-99 HRB Brinell 85-651 HB Vickers 83-976 HV Shore 26-99HS Leeb 170-960HLD UCI hardness tester w/manual probe
Model No. Description Application Notes PHT-6001 UCI Portable Hardness Tester w/1kgf Probe For surfaces with Ra below 125μin PHT-6002 UCI Portable Hardness Tester w/2kgf Probe For surfaces with Ra below 200μin PHT-6005 UCI Portable Hardness Tester w/5kgf Probe For surfaces with Ra below 400μin PHT-6010 UCI Portable Hardness Tester w/10kgf Probe For surfaces with Ra below 600μin PHT-6011 UCI Portable Hardness Tester w/LONG 1kgf Probe For Deep Groove surfaces with Ra below 125μin UCI hardness tester w/motorized probe
Model No. Description Application Notes PHT-6030 UCI Portable Hardness Tester w/.30kgf Probe Best for checking coating layer hardness; Finished thin parts PHT-6080 UCI Portable Hardness Tester w/.80kgf Probe Best for smooth bearing type surfaces PHT-6100 UCI Portable Hardness Tester w/1kgf Probe Best for machined surfaces Specifications:
Hardness Range HRC: 20.3- 70; HRB: 61-85.6 ; HV: 80-1599; HB: 76-618 Scale Selection Rockwell C (HRC); Rockwell B (HRB); Rockwell A (HRA); Brinell (HB); Vickers (HV); Leeb (HLD) and many more! Tolerance +/- 3.0% deviation of average from the reference value of the test block with a minimum of 5 tests Display type LCD Color Screen w/Backlight, adjustable brightness Language Selection English, German, Chinese, Spanish, etc. Data Logger Letters, Numerals Data Memory 2000 groups of measured data ; 20 groups of calibration data Statistical Software Supplied-can be saved in Word or Excel Data Output USB – cable supplied Power Supply Rechargeable Lithium Battery: Voltage-4.2V, 4800mAh Auto Power Off 5 minutes Recharging Time Approx. 8 hours Battery Usage Approx. 6 hours (no backlight) Net Weight(base unit) 2lbs (w/probe) Gross Weight 12 lbs Unit Dimensions 7.0 x 3.1 x 1.1” (160x80x30mm) Gross Dimensions 13.7 x 17.7 x 5.9” (350x450x150mm) Manual UCI Probe Specifications:
Probe Type/Model PHT-6001 PHT-6002 PHT-6005 PHT-6010 PHT-6011 Loading Force 1kgf (10N) 2kg (20N) 5kg (50N) 10kg (98N) 1kgf (10N) Probe Diameter 22mm 22mm 22mm 22mm 22mm Length 154mm 154mm 154mm 154mm 213mm Oscillating Rod Diameter 2.4mm 2.4mm 3mm 3mm 2.4mm Surface Roughness Requirements μm=Metric μin= Inch Ra<3.2μm
(Ra<125 μin)
Ra<5μm
(Ra<197 μin)
Ra<10 μm
(Ra<393 μin)
Ra<15 μm
(Ra<590 μin)
Ra<3.2µm
(Ra<125 µin)
Min weight of test sample 0.3kg (.66lbs) 0.3kg (.66lbs) 0.3kg (.66lbs) 0.3kg (.66lbs) 0.3kg (.66lbs) Minimum thickness of sample 2mm (.08”) 2mm (.08”) 2mm (.08”) 2mm (.08”) 2mm (.08”) 
Motorized UCI Probe Specifications:
Probe Type/Model PHT-6030 PHT-6080 PHT-6100 Loading Force .30kg (3N) .80kg (8N) 1kgf (10N) Probe Diameter 46mm 46mm 46mm Length 198mm 198mm 198mm Oscillating Rod Diameter 3.7mm 3.7mm 3.7mm Surface Roughness Ra<3.2μm Ra<5μm Ra<8μm Requirements
μm=Metric μin= Inch(Ra<125μin) (Ra<197μin) (Ra<314μin) Min weight of test sample 0.3kg (.66lbs) 0.3kg (.66lbs) 0.3kg (.66lbs) Minimum thickness of sample 2mm (.08") 2mm (.08") 2mm (.08") 
Indentation Depth (μm)
Hardness .30kg Motorized .80kg Motorized 1kg Motorized 1kg Manual 2kg Manual 5kg Manual 10kg Manual 800HV 4 5 7 7 10 15 22 600HV 4 5 8 8 11 18 25 500HV 5 6 9 9 12 19 27 300HV 6 8 11 11 16 25 35 100HV 10 13 19 19 27 43 61 OPTIONAL ACCESSORIES:
Special Application Impact Devices
Impact Device D Part No. PHT1800-100
Universal standard device:Use for the majority of hardness testing assignments
Impact Device DL Part No. PHT1800-115
Tip 4mm diameter x 1.96" length Measurements in extremely confined spaces
Impact Device G Part No. PHT1800-125
Enlarged test tip:For use on solid heavy components such as; rough castings and forgings. Brinell only.
Impact Device DC Part No. PHT1800-120
Extremely short impact deviceUsed for very confined spaces such as holes, cylinders, internal measurements
Impact Device D+15 Part No. PHT1800-110
Slim front section with coil set backHardness measurements in grooves, recessed surface
Impact Device C Part No. PHT1800-130
Reduced impact energyPrecision Support Stand Part No. PHT6000-MAN
Small Cylinder Support Ring(8-22mm diameter)Part No. PHT6000-521
CYLINDER SUPPORT for MOTORIZED PROBEPart No. PHT6000-751
Deep Hole Probe Cap(5.53mm diameter/15.5 deep)Part No. PHT6000-541
Optional Hardness Test Blocks for 6000 Series
-
NIST Certified Hardness Test Block Kit
- Part No. 900330-9410
- Includes: 1pc HRC 20’s
- 1pc HRC 40’s
- 1pc HRC 60’s
- Full form cert for each block
- Part No. 900330-9410
Aluminum/Brass Rockwell Blocks
Part No. Description Shape Range Comments 900330-9414AH Rockwell B Square 80’s Made in USA Aluminum 900330-9414AL Rockwell B Square 50’s Made in USA Aluminum 900330-9418H Rockwell E Square 90’s Made in USA Aluminum 900330-9418L Rockwell E Square 60’s Made in USA Aluminum 900330-9414BH Rockwell B Square 80’s Made in USA Brass 900330-9414BL Rockwell B Square 50’s Made in USA Brass 
Leeb Hardness Test Blocks
Part No. Description Shape Range Comments PHT1300-01 Leeb “D" Hardness Test Block Round 750-800(HRC 50’s) Phase II std. PHT130001-cert Leeb “D" Hardness Test Block Round 750-800(HRC 50’s) NIST Certified PHT1300-02 Leeb “D" Hardness Test Block Round 590-670(HRC40’s) Phase II std. PHT130002-cert Leeb “D" Hardness Test Block Round 590-670(HRC40’s) NIST Certified PHT1300-03 Leeb “D" Hardness Test Block Round 590-670(HRC40’s) Phase II std. PHT130003-cert Leeb “D" Hardness Test Block Round 490-570(HRC20’s) NIST Certified PHT1100G-01 Leeb “G" Hardness Test Block Round 480-670 For use with “G" impact devices PHT1100G-01C Leeb “G" Hardness Test Block ASTM Certified to Brinell Round 480-670 (HB200’s) For use with “G" impact devices 
Brinell Hardness Test Blocks
Part No. Description Shape Range Comments 900355-1000/150 3000kg Round 150-250 Phase II std. (Steel) 900355-1000/250 3000kg Round 250-500 Phase II std. (Steel) 900355-3010 3000kg Rectangle Low Aluminum (USA) 900355-3020 3000kg Rectangle High Aluminum (USA) 900355-3030 3000kg Rectangle 100-200HB Steel (USA) 900355-3040 3000kg Rectangle 250-350HB Steel (USA) 900355-3050 3000kg Rectangle 500+HB Steel (USA) 
HARDNESS TESTER RESOURCES
