Description
5C 5" Collet Chuck with Integral D1-6 Camlock Mounting, Stud = 7/8", #0269-0016
- Please don't buy this item unless you are familiar with this type of product. Thanks.
- Outside diameter: 6-1/2"
- Spindle: D1-6 cam lock
- No. of stud: 6
- Diameter of stud: 7/8"
- Integrated D1-6 back mounting. Install on the machine in seconds, no machining required
- Can be used on any lathe with D1-6 cam lock mounting
- Customers don't need to do any work when received, just mount it on your machine spindle and go.
- Can use any size 5C collet Round collet: 1/16 ~ 1-1/8"; Hex collet: 1/8" ~ 7/8";Square Collet: 1/8" ~ 3/4"
- Scroll and pinion design just like 3-jaw chuck operated with chuck key.
- Scroll & pinion precision machined and hardened
- Max. RPM 6000
- TIR: 0.0006"
-
2-Pinion low profile type
- scroll & pinion are hardened and finish ground
-
Use for turning, facing, boring, grinding, and milling operations
- Includes wrench and mounting bolts
Please note that you need to confirm the taper of your lathe using this 5C collet chuck is 14°15' before you place an order. Otherwise, the run-out will not be accurate at all. Please don't buy the chuck unless the taper of your lathe is exactly 14°15'. Usually, when a lathe has been running for a few years, its taper becomes not as accurate as a new lathe, which causes inaccurate run-out when operating the 5C collet chuck.