900-331D, NOUVEAU TESTEUR DE DURETÉ ROCKWELL
Rouler l'image pour zoomer
900-331D, NOUVEAU TESTEUR DE DURETÉ ROCKWELL

900-331D, NOUVEAU TESTEUR DE DURETÉ ROCKWELL

Phase II PlusSKU: 900-331D
Prix:
$4,418.97

Frais delivraison calculés à la caisse

Currency:
USD
Stock:
En stock

California Proposition 65 Warning

Paiement & Sécurité

Modes de paiement

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Sécurité

Estimer l'expédition

  • Digital Hardness Tester/Digital Rockwell Hardness Testers/Hardness Testers

    Model No. 900-331D

    Features

    • Works on all standard Rockwell Hardness Scales including HRA, HRBW, HRC, HRE, HRF among many others. And converts to Brinell (HB) and Vickers (HV)
    • Direct Digital Reading
    • Automatic conversions to Brinell, Vickers, etc.
    • Advanced design, easy to operate
    • Engineered to obtain highly sensitive and accurate readings

    This “NEW” hardness tester combines our best selling 900-331 rockwell hardness tester with our new 9500 series digital indicator upgrade. This brilliant combination gives you the very best functions of a digital Rockwell hardness tester yet has the ease of use of our analog hardness testers. Utilizing the guidelines of ASTM E-18, the 900-331D hardness tester will offer unmatched repeatability in all standard Rockwell Hardness scales (table shown below). A perfect, rugged performer suited for any environment including heat treat facilities, tool rooms, workshops, laboratories and inspection labs. Lifetime technical support is included on all Phase II Hardness Testers. So test away with confidence and a level of accuracy you will only find at Phase II.

    For full conformance to the latest Rockwell Hardness Tester
    E-18-20 specification, please call (201) 962-7373

    Features: Model No. 900-331D Rockwell Hardness Testers:

    • Direct Digital Reading
    • Automatic conversions to Brinell, Vickers, etc.
    • Advanced design, easy to operate
    • Engineered to obtain highly sensitive and accurate readings
    • Conforms to ASTM E-18 Perfect for laboratories, workshops, tool rooms, inspection labs, etc.

    Specifications:

    Minor Load 10Kgf
    Major Load 60Kgf, 100Kgf, 150Kgf
    Test Force Application Dead Weight
    Test Force Control Hydraulic Dashpot System
    Results Display Digital LCD
    Vertical Capacity 6.7 in.
    Throat Depth 6.6 in.
    Height 30.0 in.
    Width 8.50 in.
    Depth 20.0 in.
    Shipping Weight 242 lbs.

    Accessories:

    • C-scale Diamond Indento
    • 1/16″ Ball Indentor
    • 3- HRC Test Blocks
    • 1- HRB Test Block
    • Test Table 5.87″ (150mm)
    • Flat Anvil 2.5″ (63mm)
    • Spot Anvil .38: (10mm)
    • Std. Vee Anvil
    • Accessory Case
    • Dust Cover
       

    Options:

    Rockwell Hardness Tester Scale/Indentor/Load chart

    Scale Symbol Indenter Type
    Ball dimensions indicate diameter     		Preliminary Force N (kgf)> Total Force N (kgf) Typical Application
    A Spheroconical Diamond 98.07 (10) 588.4 (60) Cemented carbides, thin steel and shallow case hardened steel
    B Ball 1/16″ (1.588mm) 98.07 (10) 980.7 (100) Copper alloys, soft steels, alum. Alloys, malleable iron, etc.
    C Spheroconical Diamond 98.07 (10) 1471 (150) Steel, hard cast irons,pearltic malleable iron, titanium, deep case hardened steel & other
    material harder than HRB 100
    D Spheroconical Diamond 98.07 (10) 980.7 (100) Thin steel and medium case hardened steel and pearlitic malleable iron
    E Ball – 1/8″ (3.175mm) 98.07 (10) 980.7 (100) Cast iron, aluminum&magnesium alloys and bearing metals
    F Ball – 1/16″ (1.588mm) 98.07 (10) 588.4 (60) Annealed copper alloys, and thin soft sheet metals
    G Ball – 1/16″ (1.588mm) 98.07 (10) 1471 (150) Malleable irons, copper-nckel-zinc and cupronickel alloys
    H Ball – 1/8″ (3.175mm) 98.07 (10) 588.4 (60) Aluminum, zinc and lead
    K Ball – 1/8″ (3.175mm) 98.07 (10) 1471 (150) Bearing metals and other very soft or thin materials. Use smallest ball and heaviest
    load that does not give anvil effect
    L Ball – 1/4″ (6.350mm) 98.07 (10) 588.4 (60)
    M Ball – 1/4″ (6.350mm) 98.07 (10) 980.7 (100)
    P Ball – 1/4″ (6.350mm) 98.07 (10) 1471 (150)
    R Ball – 1/2″ (12.70mm) 98.07 (10) 588.4 (60)
    S Ball – 1/2″ (12.70mm) 98.07 (10) 980.7 (100)
    V Ball – 1/2″ (12.70mm) 98.07 (10) 1471 (150)

    HARNDESS TESTING RESOURCES:

Vous pouvez aussi aimer

Visionné récemment