California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
-
Tall Frame Rockwell Hardness Tester/Large Hardness Testers/Tall Rockwell Hardness Testers
Model No. 900-332
Features
- Works on all standard Rockwell Hardness Scales including HRA, HRBW, HRC, HRE, HRF among many others. And converts to Brinell (HB) and Vickers (HV)
- Direct analog dial reading
- Advanced design, easy to operate
- Engineered to obtain highly sensitive and accurate readings
- Perfect for the shop floor, labs, heat treat facilities and tool rooms
Rockwell Hardness Tester Setup/Installation VideoThis hardness tester comprises the very best in “state of the art” design along with dynamic precision only found at Phase II. The 900-332 Rockwell hardness tester is easy to operate, yet engineered to obtain highly sensitive and accurate readings. Utilizing the guidelines of ASTM E-18, the 900-332hardness tester will offer unmatched repeatability in all standard Rockwell Hardness scales (table shown below). A perfect, rugged performer suited for any environment including heat treat facilities, tool rooms, workshops, laboratories and inspection labs. Lifetime technical support is included on all Phase II Hardness Testers. So test away with confidence and a level of accuracy you will only find at Phase II.
For full conformance to the latest
E-18 specification, please call (201) 962-7373Features:
- 15 3/4″ Test height for extremely large parts
- Direct analog dial reading
- Advanced design, easy to operate
- Engineered to obtain highly sensitive and accurate readings
Specifications:
Minor Load 10Kgf Major Load 60Kgf, 100Kgf, 150Kgf Test Force Application Dead Weight Test Force Control Hydraulic Dashpot System Results Display Analog Dial Gage Vertical Capacity 15-3/4″ in. Throat Depth 6.5 in. Height 36.7 in. Width 9.0 in. Depth 22.0 in. Shipping Weight 200 lbs. Accessories:
- C-scale Diamond Indento
- 1/16″ Ball Indentor
- 3- HRC Test Blocks
- 1- HRB Test Block
- Test Table 5.87″ (150mm)
- Flat Anvil 2.5″ (63mm)
- Std. “V” Anvil
- Accessory Case
Options:
- NIST/ASTM certified hardness test blocks, penetrators and kits are available.
Rockwell Hardness Tester Scale/Indentor/Load chart
Scale Symbol Indenter Type
Ball dimensions indicate diameterPreliminary Force N (kgf)> Total Force N (kgf) Typical Application A Spheroconical Diamond 98.07 (10) 588.4 (60) Cemented carbides, thin steel and shallow case hardened steel B Ball 1/16″ (1.588mm) 98.07 (10) 980.7 (100) Copper alloys, soft steels, alum. Alloys, malleable iron, etc. C Spheroconical Diamond 98.07 (10) 1471 (150) Steel, hard cast irons,pearltic malleable iron, titanium, deep case hardened steel & other
material harder than HRB 100D Spheroconical Diamond 98.07 (10) 980.7 (100) Thin steel and medium case hardened steel and pearlitic malleable iron E Ball – 1/8″ (3.175mm) 98.07 (10) 980.7 (100) Cast iron, aluminum&magnesium alloys and bearing metals F Ball – 1/16″ (1.588mm) 98.07 (10) 588.4 (60) Annealed copper alloys, and thin soft sheet metals G Ball – 1/16″ (1.588mm) 98.07 (10) 1471 (150) Malleable irons, copper-nckel-zinc and cupronickel alloys H Ball – 1/8″ (3.175mm) 98.07 (10) 588.4 (60) Aluminum, zinc and lead K Ball – 1/8″ (3.175mm) 98.07 (10) 1471 (150) Bearing metals and other very soft or thin materials. Use smallest ball and heaviest
load that does not give anvil effectL Ball – 1/4″ (6.350mm) 98.07 (10) 588.4 (60) M Ball – 1/4″ (6.350mm) 98.07 (10) 980.7 (100) P Ball – 1/4″ (6.350mm) 98.07 (10) 1471 (150) R Ball – 1/2″ (12.70mm) 98.07 (10) 588.4 (60) S Ball – 1/2″ (12.70mm) 98.07 (10) 980.7 (100) V Ball – 1/2″ (12.70mm) 98.07 (10) 1471 (150) HARNDESS TESTING RESOURCES:
- REBUILT INVENTORY W/ FULL WARRANTY
- PHASE II WARRANTY CARD
- PHASE II SAMPLE EVALUATION SHEETS
- HARDNESS TESTER CONVERSION CHART
- PRINCIPLE OF ROCKWELL HARDNESS TESTING
- ROUNDNESS CORRECTION CHART FOR HARNDESS TESTING
- PORTABLE HARDNESS TESTERS
- MINIMUM THICKNESS CHART FOR ROCKWELL HARDNESS TESTING
- ROCKWELL HARDNESS SCALE INDENTOR LOAD CHART
- NIST LINKS
- NIST SCALE HISTORY
- ASTM LINKS
