TSCHORN 3D Tester Edge Finder DREHplus V2, 3/4" (19.05mm) Shank, 0.14" - 0.12" (3.6 - 3.2mm) Sensing Tip, Measuring All Axes & Rotating Center, 4940-0034


Frais delivraison calculés à la caisse

En stock

California Proposition 65 Warning

Paiement & Sécurité

Modes de paiement

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.


Estimer l'expédition




Made in Germany


The plus for your lathe

Tool measurement in all axes and the rotating center (Y) - very quickly and easily with the 3D Tester DREHplus!

The conical probing corpus of our innovative technology enables you to measure cutting inserts with different radii and/or angles at any point of the probing corpus. Measuring is done until both indicators display "0", positioning the conical probing corpus precisely on the symmetry axis. No other measuring equipment is as simple, direct, and accurate in measuring the rotating center in your lathe. When Y=0, the rotating center is aligned, ensuring optimal processing, long lifespan, and excellent surface preservation.
Y=0 corresponds to the center of rotation Measure the tools to the center of the spindle Measuring of your tools also in Z
No other measuring equipment gives you the possibility to measure the rotating centre so simply, precisely and directly in your lathe. Y=0 corresponds to the rotating centre. As a result, you ensure the best possible processing, achieve long lifetime and preserve best surfaces.

Measure the tools to the center of the spindle.

Without any further calculation, you measure your tools to the center of the spindle, respectively X= 0. 

Measuring of your tools also in Z. You can measure all tools, taking into account the length offset in your machine

It is crucial to measure your tools accurately in all axes, especially in Y. Unlike other measuring equipment, Tschorn's unique probing technology allows you to measure your tool to the rotating center directly on your lathe. Tschorn's technology is specifically developed for use in your lathe and enables you to accurately measure sharp turning tools. The 3D Tester DREHplus is designed with a patented conical probing corpus, making it possible to measure the center of the spindle in both X and Y axes directly. There is no need for further calculations because X = 0 and Y = 0.


  • Model #: 001V2T34I
  • Shank Diameter: 3/4" (19.05mm)
  • Sensing Tip: 0.14" - 0.12" (3.6 - 3.2mm)
  • Graduation: 0.0005"
  • Type: 3-D Tester for Lathes
  • Diameter: 1.75" (44.5mm)
  • Display Size: 1.53" (39mm)
  • Height: 1.97" (50mm)
  • Length: 7.01" (178.3mm)
  • Length Without Shank: 5.35" (136mm)
  • Reading: 0-40
  • Tip Size: 1.33" (34mm) long
  • Tool Material: Hardened Stainless Steel Tip
  • Country of Origin: GERMANY

Delivery contains:

3D Tester including probe tip DREHplus, adjusting key, with a factory certificate

Vous pouvez aussi aimer

Visionné récemment