California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
4 pc/set 90° Nickel Plated Indexable End Mill Set, 1/2 in., 5/8 in., 3/4 in., & 1 in. w/ 20 pc of APKT11T3 Carbide Inserts, #0028-8416
- 90° Cutting angle
- Nickel Plated
- Screw down insert
- Radial rake angle: -10°
- Axial rake angle: +7°
- All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys.
- Fitted with 10° positive rectangular insert allow high depth of cut and feed per tooth
- with 1 Torx Wrench
- Aluminum fitting case
- Carbide inserts for each end mill
- Uses APKT / APHW / APKR_APHT / APMT insert (sold separately)
Specifications:
| Shank | Cutting Diameter D |
Shank d1 |
Overall Length L |
ap | No of Inserts | Flute | Screw | Insert |
| Shank #1 | 1/2" | 5/8" | 3-1/4" | 0.433" | 1 | 1 |
M2.5 x 6 |
APKT11T3 |
| Shank #2 | 5/8" | 5/8" | 3-1/4" | 0.433" | 2 | 2 | M2.5 x 6 | APKT11T3 |
| Shank #3 | 3/4" | 3/4" | 3-1/4" | 0.433" | 3 | 3 | M2.5 x 6 | APKT11T3 |
| Shank #4 | 1" | 3/4" | 3-1/4" | 0.433" | 4 | 4 | M2.5 x 6 | APKT11T3 |
Recommended RPM
| Materials | Hardness(HB) | Cutting parameter | |||
| V(ft /min) | f(inch/Z) | ae | |||
| P | Low-carbon Steel | ≤180 | 260≤180-380) |
0.2(0.1-0.3) |
≤0.5D |
| High-carbon Steel, Alloy Steel | 180-280 | 260≤180-320) | 0.2(0.1-0.3) | ≤0.5D | |
| Tool Steel | 280-350 | 260(150-280) | 0.2(0.1-0.3) | ≤0.5D | |
