AT50 V-bride C.N.C. ER mandrins de serrage


Select the Sizes: CAT50 ER32 4", 3/32"-25/32" (6782-1095)
Prix:
$155.00

Frais delivraison calculés à la caisse

Stock:
En stock

Paiement & Sécurité

Modes de paiement

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.


Sécurité

Estimer l'expédition

Description

CAT50 V-Flange C.N.C. ER Collet Chucks

  • Constructed of alloy steel for long, durable service life
  • Hardened to HRC 52-56 to avoid damaging collet chuck threads
  • Through-Spindle coolant capability
  • Collet seat taper TIR ≤ 0.0002''
  • Taper: CAT50
  • All critical surfaces are precision ground
  • Drawbar thread: 1"-8.
  • Packed in Fitted Box
    Item Taper Collet Series Projection Length Range
    CT50-16E4 CAT50 ER16 4" 1/32"-3/8"
    CT50-16E6 CAT50 ER16 6" 1/32"-3/8"
    CT50-20E4 CAT50 ER20 4" 1/16"-1/2"
    CT50-20E6 CAT50 ER20 6" 1/16"-1/2"
    6782-1095 CAT50 ER32 4" 3/32"-25/32"
    6782-1651 CAT50 ER32 6" 3/32"-25/32"
    CT50-40E4 CAT50 ER40 4" 1/8"-1"
    CT50-40E6 CAT50 ER40 6" 1/8"-1"


    DIAGRAM OF CAT50 V-FLANGE CNC ER COLLET CHUCK

    Design, Assemble, and Dissemble of ER Collet Nut

    Eccentric Design, ISO 15488:2003(E), Accusize ER Collet Chuck Nut
    Assemble Accusize ER Collet Nut
    Inspection of Accusize ER Collet Chuck and Nut
    Dissemble Accusize ER Collet Nut
    Eccentric Design, ISO 15488:2003(E) Assemble Inspection Dissemble
    The inside of the ER collet nut is intentionally designed like off-centering to help mount the ER collet much easier. It is in accordance with the requirements listed in ISO 15488:2003(E). If it is made symmetrical, the ER collet with the diameter larger than the inside size of the collet nut cannot be installed. Insert the ER collet into the nut at an angle. Lock it onto the eccentric groove of the collet nut and push it in. (Insert the cutter right after the step, before connect it to the holder/chuck/arbor.)

    Inspect the RPM of the ER collet, ER collet nut, ER collet holder/chuck/arbor, etc. Take out the tool bit, press the end of the ER collet until the collet off the position. Push it out of the nut. (after take out the nut out of the holder.)

    Vous pouvez aussi aimer

    Visionné récemment