California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
-
Gorilla 4 Flute Square End GMX-35 Coated End Mills, Inch, High Performance,
Made in USA.
- Patented variable flute and index design which reduces chatter and vibration.
- Recommended for aggressive machining applications in all materials including,
stainless, inconel, titanium, tool steels and hardened materials. Should be run at specific parameters. - Produced with the highest Transverse Rupture
- Strength (TRS) nano-grain carbide substrate available.
-
Should be run at specific parameters. See “Speeds and Feeds” chart HERE.
Gorilla coatings:
- are just a few thousandths of a millimeter thick but harder than steel; these low-friction coatings are extremely wear-resistant and chemically inert. The optimum coating is determined on the basis of both conditions of use and economic considerations.
About the GMX-35 Coating:
Special high-performance coating for high speed machining. GMX-35 performance surpasses all conventional coatings. This universal high-performance coating is especially designed for milling and drilling. Also suitable for dry machining.
- Structure: Gradient
- Nanohardness (GPa): 32
- Friction (fretting) Coefficient: 0.35
- Thickness (µm): 2-4
- Maximum Working Temperature: 1100° C (2012° F)
- Color: Silver-Gray
Cutting Materials:
- Gray Cast Iron, Ductile Iron, Soft Steels, (A36,1018, 8620,1045), Alloy Steels, (4340, 4140), 4140 Pre-Hard (38 to 42 Rc), Tool Steels (A2,D2,S7), Die Steels, (H13,P20), Stainless Steel, (303, 304, 316), Difficult Stainless Steel, (400 & PH Series), Stainless Steel (13-8), High Temperature Alloys, Titanium (6AL4V), Inconel 718, Inconel 625
Machining Method:
Tolerance:
- Cut Dia +.000/-.002,
- Shank Dia -.0001/-.0005,
- LOC +.025/+.050,
- OAL +/-.050
Dimensions:
STANDARD Tool Length
ACCUSIZE SKU
Gorilla Mill SKU
D1
Cutting Dia.D2
Shank Dia.
LOC
Length of Cut
OAL
Overall LengthCoating
0001-0305
GM18F4
1/8
1/8
1/2
1-1/2
GMX-35
0001-0535
GM532F4
5/32
3/16
1/2
2
GMX-35
0001-0344
GM316F4
3/16
3/16
5/8
2
GMX-35
0001-0248
GM14F4
1/4
1/4
3/4
2-1/2
GMX-35
0001-0502
GM516F4
5/16
5/16
7/8
2-1/2
GMX-35
0001-0456
GM38F4
3/8
3/8
7/8
2-1/2
GMX-35
0001-0592
GM716F4
7/16
7/16
1
2-1/2
GMX-35
0001-0157
GM12F4
1/2
1/2
1-1/4
3
GMX-35
0001-0540
GM58F4
5/8
5/8
1-1/4
3-1/2
GMX-35
0001-0364
GM34F4
3/4
3/4
1-1/2
4
GMX-35
0001-0044
GM10F4
1
1
1-1/2
4
GMX-35
-
Product NameMaterial Number
