California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
Hardness Test Blocks and Accessories/Rockwell Hardness Test Blocks/Brinell Hardness Test Blocks/Vickers Hardness Test Blocks/Portable Hardness Test Blocks/Leeb Hardness Test Blocks
Please contact us to ensure the part is NOT discontinued prior to ordering.
Features
- Rockwell Hardness Test Blocks – All Scales
- Superficial Rockwell Hardness Test Blocks – All Scales
- Brinell Hardness Test Blocks – All Scales
- Vickers Hardness Test Blocks – All Scales
- Knoop Hardness Test Blocks – All Scales
- Leeb Hardness Test Blocks
- Certified and Non-Certified blocks available
- Penetrators – All Scales
- Anvils -All types
- Phase II offers a vast array of different hardness test blocks for Rockwell, Brinell and Vickers scales, as well as Portable hardness testers
- Phase II hardness test blocks are made of high grade materials to insure unmatched accuracy and repeatability throughout the entire block.
- Phase II Hardness test block surfaces are precision ground and lapped to an average finish of less than 2uin.
- Hardness Test blocks always engineered to obtain highly sensitive and accurate readings.
- All Made in the USA hardness test blocks conform to current ASTM specifications
- Traceability to NIST is offered on HRC steel blocks only.
- Prestigious Accredited laboratory by A2LA and NVLAP in the USA
Rockwell Hardness Test Blocks (Steel):
| Part No. | Description | Shape | Range | Comments |
|---|---|---|---|---|
| 900330-9413 | Rockwell A | Round | 80-88 | Phase II std. |
| 900330-9414H | Rockwell B | Square | 85-100 | Made in USA |
| 900330-9414L | Rockwell B | Square | 60-80 | Made in USA |
| 900330-9414C | Rockwell B | Round | 85-100 | Phase II std. |
| 900330-9414F | Rockwell B | Round | 60-80 | Phase II std. |
| 900330-9415C | Rockwell C | Round | 20-30’s | Phase II std. |
| 900330-9415D | Rockwel | Round | 20-30’s | Phase II NIST certified |
| 900330-9415E | Rockwell C | Square | 20-30’s | Made in USA/NIST cert. |
| 900330-9416C | Rockwell C | Round | 40’s-50’s | Phase II std. |
| 900330-9416D | Rockwell C | Round | 40’s-50’s | Phase II NIST certified |
| 900330-9416E | Rockwell C | Square | 35-55 | Made in USA/NIST cert. |
| 900330-9417C | Rockwell C | Round | 60-70 | Phase II std. |
| 900330-9417D | Rockwell C | Round | 60-70 | Phase II NIST certified |
| 900330-9417E | Rockwell C | Square | 60-70 | Made in USA/NIST cert. |
| 900340-9001 | Superficial HR15N | Round | 70-91 | Phase II std. |
| 900340-9002 | Superficial HR30N | Round | 42-80 | Phase II std. |
| 900340-9003 | Superficial HR45N | Round | 20-70 | Phase II std. |
| 900340-9004 | Superficial HR45T | Round | 55-72 | Phase II std. |
| 900340-9001 | Superficial HR30T | Round | 70-82 | Phase II std. |
| 900340-9001 | Superficial HR15T | Round | 88-93 | Phase II std. |
| Part No. | Description | NOTES |
| 900330-9413C | Rockwell A | Round/Range80-88 |
| 900330-9413E | Rockwell A- USA Certified | Round/Range80-88 |
| 900340-9001D | ASTM Certified Superficial HR15N | Round/Range70-91 |
| 900340-9002D | ASTM Certified Superficial HR30N | Round/Range42-80 |
| 900340-9003D | ASTM Certified Superficial HR45N | Round/Range20-70 |
| 900340-9004D | ASTM Certified Superficial HR45T | Round/Range55-72 |
| 900340-9005 | Superficial HR30T | Round/Range70-82 |
| 900340-9005D | ASTM Certified Superficial HR30T | Round/Range70-82 |
| 900340-9006 | Superficial HR15T | Round/Range88-93 |
| 900340-9006D | ASTM Certified Superficial HR15T | Round/Range88-93 |
| 900355-3000/250 | 3000kg Steel | Round/Range250-500 |
| 900330-9441D | 1/16" Carbide Ball | Import Certified |
| 900355-3000/150 | 3000kg Steel | Round/Range150-250 |
3pc NIST certified test block kit
Part No. 900330-9410
3pc set includes HRC blocks w/NIST certification for each block in custom carry case
NIST Master Calibration Kit-C scale
Part No. 900330-9410M
Kit includes same HRC test blocks as above as well as a certified diamond indentor in custom carry case
NIST Master Calibration Kit-C/N scale
Part No. 900330-9410Z
Kit includes same test blocks as above as well as a certified Combo C&N scale diamond indentor in custom carry case
Rockwell Hardness Test Blocks (Aluminum):
| Part No. | Description | Shape | Range | Comments |
|---|---|---|---|---|
| 900330-9414AH | Rockwell B | Square | 80’s | Made in USA |
| 900330-9414AL | Rockwell B | Square | 50’s | Made in USA |
| 900330-9418H | Rockwell E | Square | 90’s | Made in USA |
| 900330-9418L | Rockwell E | Square | 60’s | Made in USA |
Rockwell Hardness Test Blocks (Brass)
| Part No. | Description | Shape | Range | Comments |
|---|---|---|---|---|
| 900330-9414BH | Rockwell B | Square | 80’s | Made in USA |
| 900330-9414BL | Rockwell B | Square | 50’s | Made in USA |
Brinell Hardness Test Blocks:
ASTM E10
ISO 6506
All of our Made in USA Brinell Hardness Test Blocks come certified to applicable standards. We adhere to a strict procedure for the calibration of these blocks, and the accuracy of the tester is maintained using a proving ring and load cell both traceable to N.I.S.T. The readings themselves are done using a stage micrometer also calibrated and traceable to N.I.S.T.
| Part No. | Description | Shape | Range | Comments |
|---|---|---|---|---|
| 900355-1000/150 | 3000kg Steel | Round | 150-250 | Phase II std. |
| 900355-1000/250 | 3000kg Steel | Round | 250-400 | Phase II std. |
| 900355-3000 | 3000kg Steel | Rectangle | All | Steel (USA) (Certified) |
| 900355-1000 | 1000kg Steel | Rectangle | All | Steel (USA) (Certified) |
| 900355-0250 | 250kg Steel | Rectangle | All | Steel (USA) (Certified) |
| 900355-0250 | 250kg Steel | Rectangle | All | Steel (USA) (Certified) |
| 900355-1500 | 1500kg Steel | Rectangle | All | Steel (USA) (Certified) |
| 900355-3010 | 3000kg | Rectangle | Low | Aluminum (USA) (Certified) |
| 900355-3020 | 3000kg | Rectangle | High | Aluminum (USA) (Certified) |
| 900355-3030 | 3000kg | Rectangle | 100-200 | Steel (USA) (Certified) |
| 900355-3040 | 3000kg | Rectangle | 250-350 | Steel (USA) (Certified) |
| 900355-3050 | 3000kg | Rectangle | 500+ | Steel (USA) (Certified) |
Vickers Hardness Test Blocks/Knoop Hardness Test Blocks:
Must advise the load and hardness range to order
| Part No. | Description | Range | Comments |
|---|---|---|---|
| 900390-V010 | Vickers (1 gram to 1,000 gram) | All | Made in USA |
| 900390-V020 | Heavy Load Vickers (1 Kg to 50 Kg) | All | Made in USA |
| 900390-K010 | Knoop (1 gram to 1,000 gram) | All | Made in USA |
Leeb Hardness Test Blocks:
| Part No. | Description | Shape | Range | Comments |
|---|---|---|---|---|
| PHT1300-01 | Leeb “D” Test Block | Round | 750-800 | Phase II std. |
| PHT1300-02 | Leeb “D” Test Block | Round | 590-670 | Phase II std. |
| PHT1300-03 | Leeb “D” Test Block | Rectangle | 490-570 | Phase II std. |
| PHT1300-01cert | Leeb “D” Test Block | Rectangle | 750-800 | NIST Certified |
| 900355-0250 | Leeb “G” Test Block | Rectangle | 590-670 | For use with “G” impact devices |
Diamond Penetrators for Hardness Testers:
| Part No. | Description | Comments |
|---|---|---|
| 900330-9440 | Rockwell C scale | Phase II std. |
| 900330-9440 | Rockwell C scale | Rockwell C scale |
| 900330-9440A | Rockwell C scale | Grade A (USA) |
| 900330-9440B | Rockwell C scale | Grade B (USA) |
| 900330-9440C | Combination C&N scale | Made in USA |
| 900390-0100 | Vickers Indentor – Phase II | Phase II std. |
| 900390-0100C | Vickers Indentor Certified | Made in USA |
| 900390-0150 | Knoop Indentor – Phase II | Phase II std. |
| 900390-0150C | Knoop Indentor Certified | Made in USA |
Penetrators: Carbide Ball:
| Part No. | Description | Comments |
|---|---|---|
| 900330-9441 | 1/16” Carbide Ball | Phase II std. |
| 900330-9441C | 1/16” Carbide Ball | Certified (USA) |
| 900330-18 | 1/8” Carbide Ball | Phase II std. |
