V-bride CNC ER mandrins


Taille des mandrins à pince: CAT40 ER16 2.76" (1601-0005)
Prix:
$83.00

Frais delivraison calculés à la caisse

Stock:
En stock

California Proposition 65 Warning

Paiement & Sécurité

Modes de paiement

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.


Sécurité

Estimer l'expédition

Description

CAT40 V-Flange Collet Chucks

    • For ER16, ER32, ER20 and ER40 Collet.
    • Made of alloy forged steel, Hardened to HRC 52-56.
    • RPM: 8000
    • Draw Bar Thread:
      • CAT40: 5/8-11"
      • BT40: M16x2
Item Taper Collet Size Projection Length Range
1601-0005 CAT40 ER-16 2.76" 1/32"-3/8"
1601-0010 CAT40 ER-16 4" 1/32"-3/8"
1601-0025 CAT40 ER-20 2.76" 1/16"-1/2"
1601-0030 CAT40 ER-20 4" 1/16"-1/2"
1601-0015 CAT40 ER-32 2.76" 3/32"-25/32"
1601-0020 CAT40 ER-32 4" 3/32"-25/32"
1601-0035 CAT40 ER-40 2.76" 1/8"-1"
1601-0040 CAT40 ER-40 4" 1/8"-1"
1608-0016 BT40 ER-16 4" 1/32"-3/8"
1608-0040 BT40 ER-40 4" 1/8"-1"

Design, Assemble, and Dissemble of ER Collet Nut

Eccentric Design, ISO 15488:2003(E), Accusize ER Collet Chuck Nut

Assemble Accusize ER Collet Nut

Inspection of Accusize ER Collet Chuck and Nut

Dissemble Accusize ER Collet Nut

Eccentric Design, ISO 15488:2003(E) Assemble Inspection Dissemble
The inside of the ER collet nut is intentionally designed like off-centering to help mount the ER collet much easier. It is in accordance with the requirements listed in ISO 15488:2003(E). If it is made symmetrical, the ER collet with the diameter larger than the inside size of the collet nut cannot be installed. Insert the ER collet into the nut at an angle. Lock it onto the eccentric groove of the collet nut and push it in. (Insert the cutter right after the step, before connect it to the holder/chuck/arbor.)
 
Inspect the RPM of the ER collet, ER collet nut, ER collet holder/chuck/arbor, etc. Take out the tool bit, press the end of the ER collet until the collet off the position. Push it out of the nut. (after take out the nut out of the holder.)

Vous pouvez aussi aimer

Visionné récemment