R8 Shank ER Collet Chucks, ER32, ER40, 7/16"-20


Size of ER Collet: ER40 (0223-0240)
Price:
$72.00

Shipping calculated at checkout

Stock:
In stock

California Proposition 65 Warning

Payment & Security

Payment methods

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Security

Estimate shipping

Description

R8 SHANK ER COLLET CHUCKS

R8 taper shank ER collet chucks are typically used on manual milling machines. The R8 taper end fits into a machine spindle and the ER collet nut is compatible with ER collet. The ER32 nut is compatible with the ER32 style collet and the ER40 nut works with the ER40 style collet. ER collets are used to hold all the machine tools with a round shank. These R8 shank ER collet chucks deliver a quality significantly above average on market. The total indicator runout (TIR) is less than 0.0002". The MAX RPM on the manual milling machines is 8,000. The manufacturer of the collet chucks inspects and produces them in a highly sophisticated lab and factory. You can hardly expect the collet chucks from the other MFG to be of the same quality.

  • Made of high-grade tool steel
  • Hardened and precise ground
  • Max T.I.R. 0.0002" O.D to I.D
  • No wrench included
Item Shank Type Collet Capacity Collet Nut Style Gage
Length
Collet Nut
Diameter
Drawbar End
0223-0232 R8 ER32 0.08"-0.787" Slotted 2.48" 1.97" 7/16"-20
0223-0240 R8 ER40 0.118"-1.023" Slotted 2.83" 2.48" 7/16"-20

Design, Assemble, and Dissemble of ER Collet Nut

Eccentric Design, ISO 15488:2003(E), Accusize ER Collet Chuck Nut Assemble Accusize ER Collet Nut Inspection of Accusize ER Collet Chuck and Nut Dissemble Accusize ER Collet Nut
Eccentric Design, ISO 15488:2003(E) Assemble Inspection Dissemble
The inside of the ER collet nut is intentionally designed like off-centering to help mount the ER collet much easier. It is in accordance with the requirements listed in ISO 15488:2003(E). If it is made symmetrical, the ER collet with the diameter larger than the inside size of the collet nut cannot be installed. Insert the ER collet into the nut at an angle. Lock it onto the eccentric groove of the collet nut and push it in. (Insert the cutter right after the step, before connect it to the holder/chuck/arbor.)

 
Inspect the RPM of the ER collet, ER collet nut, ER collet holder/chuck/arbor, etc. Take out the tool bit, press the end of the ER collet until the collet off the position. Push it out of the nut. (after take out the nut out of the holder.)

 

You may also like

Recently viewed