California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
Carbide Inserts, CVD Coating, CCMT, Black/Yellow, 10 ps/box
- Insert Style: CCMT
- 7 degree
- Insert Grade: BPS101
- Chip Breaker: MD
- Material: Carbide
- Coating: CVD Al2O3 TICN
- Machining Parts Material: Steel
- Machining Process: Finish
Product features
- BPS101 Black/Yellow Coating Grade
- CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness
- Can bear high temperatures
- For steel and steel castings finishing to roughing processing
- Continue cutting to light interrupted cutting
- Machining of gray and ductile iron at low to medium cutting speed
- For hard materials, continuous cutting and light interrupted cutting from finishing to roughing
- Wet and dry processing
- Combination of fibrous TICN and fine-grained Al2O3 increases abrasion resistance and anti-chipping
- Preferred choice chip breaker on General Purpose Finishing
Features of chipbreaker
- For medium-duty turning with broad capability for steel, stainless steel, grey, and nodular cast-iron
- Operations: turning, facing, and profiling
- Advantages: all-round, reliable with problem-free machining
- Limitations: depth of cut and feed, risk of overloading the cutting edge
- Components typically: axles, shafts, hubs, gears, etc.
| Item # | Product # | Coating | ANSI # | I.S.O. # | I.C | Thickness | Hole | Radius |
| 6200-1008 |
2200-1008 | CVD | CCMT21.51-MD | CCMT060204-MD | 1/4" | 3/32" | 0.110" | 1/64" |
| 6100-1008 |
2100-1008 | TiN | CCMT21.51 | CCMT060204 | 1/4" | 3/32" | 0.110" | 1/64" |
| 6200-1014 |
2200-1014 | CVD | CCMT32.51-MD | CCMT09T304-MD | 3/8" | 5/32" | 0.173" | 1/64" |
| 6200-1016 |
2200-1016 | CVD | CCMT32.52-MD | CCMT09T308-MD | 3/8" | 5/32" | 0.173" | 1/32" |
| 6200-1020 |
2200-1020 | CVD | CCMT432-MD | CCMT120408-MD | 1/2" | 3/16" | 0.216" | 1/32" |
Recommended Cutting Parameter
| Item # / Product # |
Depth of Cut ap |
Feed Speed fn=inch/r |
Cutting Speed Vc(ft/min) |
| 6200-1008 / 2200-1008 | |||
| 6200-1014 / 2200-1014 | 0.014-0.098 inch | .004-0.012 ipr | 393-1181 sfm |
| 6200-1016 / 2200-1016 | |||
| 6200-1020 / 2200-1020 |
