California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
RH SCLCR Coolant Through Indexable Boring Bar
- Right Hand, 3 Cutting Edge, and 7° Relief
- Profiling bar for semi-finishing and finishing operations
- Bar hardness approximately 45HRC
- Extreme gloss finish
- Negative 5-degree end & side cutting angle
- Positive 80-degree diamond CCMT inserts
- Boring from light roughing to finishing in small bores.
- General-purpose boring bar fitted with rhomboidal positive inserts (80°angle) which are free cutting with strong cutting edges.
- The coolant hole with a diameter range varying between 3/32" and 5/32" in accordance with the bar size allows to cool the cutting edge and remove chips.
- The inserts are set with a 0° rake angle and an inclination angle shown in the table below.
- Made of tool steel with nitrogen superficial treatment, Hardness 60 HRC, blackening by PVD coating, thickness 0.0002".
- Insert CCMT 21.51 Included & Key Included
L: Overall Length
B: Min. Bore
** For purchasing additional inserts, you may find the corresponding Insert SKU below:
| Item | Model | Shank Dia. (D) | Overall Length (L) | Neck | A | aº | F | Min. Bore (B) | Insert (SKU) |
Insert Screw |
| 2800-0034 | A05H SCLCR-2 | 5/16" | 4.000" | 0.276" | 0.945" | 15° | 0.187" | 0.315" |
CCMT 21.5 (TiN Coated CCMT21.51, 2100-1008) (CVD Coated CCMT21.51-MD, 2200-1008)
|
M2.5 x 5 (0046-2505) |
| 2800-0035 | A06J SCLCR-2 | 3/8" | 4.500" | 0.336" | 1.000" | 13° | 0.250" | 0.480" |
M2.5 x 5 (0046-2505) |
|
| 2800-0036 | A08K SCLCR-3 | 1/2" | 5.000" | 0.461" | 1.220" | 10° | 0.312" | 0.600" |
CCMT 32.5 (CVD Coated CCMT32.51, 2200-1014) (CVD Coated CCMT32.52, 2200-1016) |
M4 x 8 (0046-4008) |
| 2800-0037 | A10M SCLCR-3 | 5/8" | 6.000" | 0.586" | 1.339" | 7° | 0.406" | 0.770" |
M4 x 8 (0046-4008) |
|
| 2800-0038 | A12R SCLCR-3 | 3/4" | 8.000" | 0.712" | 1.418" | 7° | 0.500" | 0.930" |
M4 x 8 (0046-4008) |
|
| 2800-0039 | A16S SCLCR-3 | 1" | 10.000" | 0.961" | 1.540" | 3° | 0.651" | 1.300" |
M4 x 10 (0046-4010) |
