California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
Gorilla Mill Silverback End Mill Serials. A descendant of Gorilla Mills.
Aluminum Cutting Pro.
Made in USA.
- Variable flute. Engineered to repel aluminum. For roughing and finishing of non-ferrous materials, aluminum, copper, brass, plastic, etc. High velocity, high material removal rate. Center cutting.
- Available in special diameters, lengths and completely resharpenable.
- Should be run at specific parameters. See “Speeds and Feeds” chart HERE.
Gorilla coatings:
- are just a few thousandths of a millimeter thick but harder than steel; these low-friction coatings are extremely wear-resistant and chemically inert. The optimum coating is determined on the basis of both conditions of use and economic considerations.
About the ZrN Coating:
- Structure: Monolayer
- Nanohardness (GPa): 20
- Friction (fretting) Coefficient: 0.4
- Thickness (µm): 2-4
- Maximum Working Temperature: 550° C (1020° F)
- Color: Pale Yellow
Cutting Materials:
- Aircraft Aluminum, (2000,5000, 7000 series), Soft Aluminum, (6061), Copper (200 Brinell <), Copper (200 Brinell >), Cast Aluminum (6% Silcon & <), Cast Aluminum (6% Silcon & >), Brass, Bronze
Machining Method:
Tolerance:
- Cut Dia +.000/-.002,
- Shank Dia -.0001/-.0005,
- LOC +.025/+.050,
- OAL +/-.050
Dimensions:
| ACCUSIZE SKU | Gorilla Mill SKU |
D1 Cutting Dia. |
D2 Shank Dia. |
LOC | OAL | TOOL LENGTH |
| 0002-1014 | GMA18FS3ZrN | 1/8 | 1/8 | 1/4 | 1-1/2 | STUB |
| 0002-1016 | GMA18FSH3ZrN | 1/8 | 1/8 | 3/8 | 2 | STUB |
| 0002-0425 | GMA18F3ZrN | 1/8 | 1/8 | 1/2 | 1-1/2 | STANDARD |
| 0002-1018 | GMA316FS3ZrN | 3/16 | 3/16 | 3/8 | 2 | STUB |
| 0002-0435 | GMA316F3ZrN | 3/16 | 3/16 | 5/8 | 2 | STANDARD |
| 0002-1020 | GMA14FS3ZrN | 1/4 | 1/4 | 3/8 | 2 | STUB |
| 0002-1022 | GMA14FSH3ZrN | 1/4 | 1/4 | 1/2 | 2 | STUB |
| 0002-0409 | GMA14F3ZrN | 1/4 | 1/4 | 3/4 | 2-1/2 | STANDARD |
| 0002-0410 | GMA14FL3ZrN | 1/4 | 1/4 | 1-1/2 | 4 | LONG |
| 0002-1024 | GMA516FS3ZrN | 5/16 | 5/16 | 7/16 | 2 | STUB |
| 0002-0475 | GMA516F3ZrN | 5/16 | 5/16 | 7/8 | 2-1/2 | STANDARD |
| 0002-0476 | GMA516FL3ZrN | 5/16 | 5/16 | 1-1/2 | 4 | STANDARD |
| 0002-1026 | GMA38FS3ZrN | 3/8 | 3/8 | 1/2 | 2 | STUB |
| 0002-0462 | GMA38F3ZrN | 3/8 | 3/8 | 7/8 | 2-1/2 | STANDARD |
| 0002-0463 | GMA38FHL3ZrN | 3/8 | 3/8 | 1 | 2-1/2 | STANDARD |
| 0002-0464 | GMA38FXL3ZrN | 3/8 | 3/8 | 2 | 4 | STANDARD |
| 0002-1028 | GMA716FS3ZrN | 7/16 | 7/16 | 1/2 | 2-1/2 | STUB |
| 0002-0504 | GMA716F3ZrN | 7/16 | 7/16 | 1 | 2-1/2 | STANDARD |
| 0002-1030 | GMA12FS3ZrN | 1/2 | 1/2 | 5/8 | 2-1/2 | STUB |
| 0002-0385 | GMA12FH3ZrN | 1/2 | 1/2 | 1 | 3 | STANDARD |
| 0002-0384 | GMA12F3ZrN | 1/2 | 1/2 | 1-1/4 | 3 | STANDARD |
| 0002-0386 | GMA12FL3ZrN | 1/2 | 1/2 | 1-1/2 | 4 | LONG |
| 0002-0387 | GMA12FXL3ZrN | 1/2 | 1/2 | 2 | 4 | EXTRA LONG |
| 0002-1032 | GMA58FS3ZrN | 5/8 | 5/8 | 3/4 | 3 | STUB |
| 0002-0484 | GMA58F3ZrN | 5/8 | 5/8 | 1-1/4 | 3-1/2 | STANDARD |
| 0002-0485 | GMA58FHL3ZrN | 5/8 | 5/8 | 1-5/8 | 4 | STANDARD |
| 0002-0486 | GMA58FL3ZrN | 5/8 | 5/8 | 2 | 4 | LONG |
| 0002-1034 | GMA34FS3ZrN | 3/4 | 3/4 | 1 | 3 | STUB |
| 0002-0437 | GMA34F3ZrN | 3/4 | 3/4 | 1-1/2 | 4 | STANDARD |
| 0002-0438 | GMA34FHL3ZrN | 3/4 | 3/4 | 1-5/8 | 4 | STANDARD |
| 0002-0439 | GMA34FL3ZrN | 3/4 | 3/4 | 2 | 4 | LONG |
| 0002-0440 | GMA34FLH3ZrN | 3/4 | 3/4 | 2-1/4 | 5 | LONG |
| 0002-1036 | GMA10FS3ZrN | 1 | 1 | 1-1/4 | 4 | STUB |
| 0002-0356 | GMA10F3ZrN | 1 | 1 | 1-1/2 | 4 | STANDARD |
| 0002-0357 | GMA10FL3ZrN | 1 | 1 | 2 | 4 | LONG |
| 0002-0358 | GMA10FXL3ZrN | 1 | 1 | 2-1/2 | 5 | EXTRA LONG |
