California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.Payment & Security
Méthodes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer la livraison
Informations produit supplémentaires
6″ x .75″ CBN 180 grit Corner Radius Wheel, 1.25″ arbor.
Available in CBN and Diamond Designed for producing chip breaker form on fly cutters and lathe tools, the Tradesman CR wheels are 6” in diameter and
have two rads: 0.160” and 0.060”. Corner rads are for form tool work round ends and concave shapes.
The Tradesman CR Lathemaster Wheel is a good compliment to the Tradesman End Mill Workstation which commonly has diamond
wheels for set screw flats and neck reductions on carbide tools. The CBN Lathe-master wheel can be
used on the other side of the grinder for lathe tools or general-purpose grinding of steel. The wheel is
3/4” wide and has a 1/2” of plating on the side for flat grinds.