Description
Features:
- Indexing and grinding fixture.
- Uses ER-32 collets (range 1/16"-13/16") for better gripping and accuracy.
- Extends the capabilities of drill presses, surface grinders, gear cutters, and milling machines.
- Spindle hardened and ground with 0.0005" (T.I.R.) run-out.
- 10 vernier holes for 1° indexing.
- 2" spindle travel for flute grinding.
- 5" diameter index plate has 36 hole circles and graduated by 0 to 35 for direct indexing in 10° steps and is marked in 5° increments.
- Spindle lock for tightening the collet.
- Base footprint: 4.5x4" ground parallel to the spindle.
- ER collet is not included and can be purchased separately.
![Diagram of Accusize 0225-0206 ER32 Collet Index Jig for Milling Machines](https://cdn.shopify.com/s/files/1/0427/8409/6410/files/Diagram_of_0225-0206.png?v=16%E2%89%A41804046)
Some operation examples
Machine the bottom of the 0225-0206 Spin Indexer
Mount 0225-0206 Spin Indexer on a milling table
![Mount 0225-0206 Spin Indexer on a milling table](https://cdn.shopify.com/s/files/1/0427/8409/6410/files/0225-0206Dnoisy_600x600.png?v=1666889612)
Mill the sides of the bottom plates
![Mill the sides of the bottom plates](https://cdn.shopify.com/s/files/1/0427/8409/6410/files/0225-0206Gnoisy_600x600.png?v=1666889787)
After the bottom plates are milled, it will be a quick-mounting fixture on a machine vise.
![After the bottom plates are milled, it will be a quick-mounting fixture on a machine vise.](https://cdn.shopify.com/s/files/1/0427/8409/6410/files/0225-0206Hnoisy_600x600.png?v=1666889871)
Use a matching tailstock when machining a long workpiece
![Use a matching tailstock when machining a long workpiece with CanCNC ER32 Spin Indexer](https://cdn.shopify.com/s/files/1/0427/8409/6410/files/0225-0206B_600x600.png?v=1666889931)
Example of Operation