Phase II+, Testeur de dureté ultrasonique portable avec sonde 2kg (manuel),
Rouler l'image pour zoomer
Phase II+, Testeur de dureté ultrasonique portable avec sonde 2kg (manuel),

Phase II+, Testeur de dureté ultrasonique portable avec sonde 2kg (manuel), #PHT -6002

Phase II PlusSKU: PHT-6002
Prix:
$5,631.53

Frais delivraison calculés à la caisse

Currency:
USD
Stock:
En stock

California Proposition 65 Warning

Paiement & Sécurité

Modes de paiement

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Sécurité

Estimer l'expédition

Description

Ultrasonic Portable Hardness Tester

UCI/Dynamic Hardness Tester

Series 6000

Non-Destructive Hardness Testing

 

 

Features:

  • Non-Destructive hand held portable hardness tester
  • Combines UCI and Leeb portable hardness testing in one state of the art device
  • Test steel with min thickness of .08" and unlimited max thickness (Other materials may have larger minimum thickness levels, depending on hardness)
  • Blazing fast test results
  • Rockwell, Brinell and Vickers hardness test conversions shown on display
  • Large Memory w/USB Output
  • Choice of manual UCI probes; 1kg, 2kg, 5kg & 10kg
  • Optional Motorized Probes: .30kg, .80kg, & 1kgf
  • Available Impact Devices(Leeb) D, DC, D+15, G & DL

MEASURING METHOD: UCI & Leeb Portable Hardness Testers

There are two basic methods of portable hardness testing that is accepted in the field today.

“Ultrasonic Contact Impedance” is based on a 136 degree diamond at the end of a vibrating rod being depressed into the test surface at a fixed load. The difference in Ultrasonic vibration frequency is then calculated into a hardness value. The UCI hardness test procedure is slower than the Dynamic Impact style, however the “UCI” method of hardness testing is portable, easy and accurate. It also has its own advantages when utilized for certain hardness testing applications. UCI hardness testers are not restricted to large mass items like dynamic type testers. These hardness testers can test metals as thin as 2mm and at a hardness value as low as 20HRC (75HB). They also excel at performing hardness tests on larger, harder metals as well. Another reason for the rise in popularity is due to the fact that the UCI method is categorized as “Non-Destructive”. That translates into less scrap parts/ lower mfg costs due to necessary inspections.

“Dynamic Impact” is based on the Leeb principle of hardness developed by Dietmar Leeb in the 1970’s. A spring loaded impact body is thrust to the test surface, effecting rebound. The speed of both the initial thrust and the rebound is measured in a non-contact mode. This is calculated as a Leeb hardness value and then automatically converted to Rockwell C, B, Brinell, Vickers and Shore hardness Values. It has effectually brought easy, fast and accurate results to portable hardness testing.

UCI Portable Hardness testers

Scales-UCI Measurement Range Tolerance
Rockwell C
Rockwell B		 20-70 HRC
41-99 HRB		 +/- 1.5 HRC
+/-1.5 HRB
Rockwell A 61-85 HRB +/-1.5 HRA
Brinell
Vickers		 76-618 HB
80-1599 HV		 +/- 3% HB
+/- 3% HV

Can also test in the following scales(UCI only) HRN15 – HRN30 – HRN45 – HRT15 – HRT30 – HRT45 HRF – HK – HD.

LEEB Portable Hardness Testers

Scales-UCI Measurement Range Tolerance
Rockwell C
Rockwell B		 25-67 HRC
59-99 HRB		 +/- 1.5 HRC
+/-1.5 HRB
Brinell 85-651 HB +/- 10 HB
Vickers
Shore		 83-976 HV
26-99HS		 +/- 12 HV
+/-10HS
Leeb 170-960HLD +/- 6HL

UCI portable hardness tester w/manual probe

Model No. Description Application Notes
PHT-6001 UCI Portable Hardness Tester w/1kgf Probe For surfaces with Ra below 125?in
PHT-6002 UCI Portable Hardness Tester w/2kgf Probe For surfaces with Ra below 200?in
PHT-6005 UCI Portable Hardness Tester w/5kgf Probe For surfaces with Ra below 400?in
PHT-6010 UCI Portable Hardness Tester w/10kgf Probe For surfaces with Ra below 600?in

UCI portable hardness tester w/motorized probe

Model No. Description Application Notes
PHT-6030 UCI Portable Hardness Tester w/.30kgf Probe Best for checking coating layer hardness; Finished thin parts
PHT-6080 UCI Portable Hardness Tester w/.80kgf Probe Best for smooth bearing type surfaces
PHT-6100 UCI Portable Hardness Tester w/1kgf Probe Best for machined surfaces

Specifications:

Hardness Range
Scale Selection

Tolerance

Display Type		 HRC: 20.3- 70; HRB: 61-85.6 ; HV: 80-1599; HB: 76-618
Rockwell C (HRC); Rockwell B (HRB); Rockwell A (HRA); Brinell (HB); Vickers (HV); Leeb (HLD) and many more!
+/- 3.0% deviation of average from the reference value of the hardness test block with a minimum of 5 tests
LCD Color Screen w/Backlight, adjustable brightness
Language Selection
Data Logger
Data Memory		 English, German, Chinese, Spanish, etc.
Letters, Numerals
2000 groups of measured data ; 20 groups of calibration data
Statistical Software
Data Output		 Supplied-can be saved in Word or Excel
USB-cable supplied
Power Supply
Auto Power Off		 Rechargeable Lithium Battery: Voltage-4.2V, 4800mAh
5 minutes
Recharging Time
Battery Usage		 Approx. 8 hours
Approx. 6 hours (no backlight)
Net Weight(base unit)
Gross Weight		 2lbs (w/probe)
12 lbs
Unit Dimensions
Gross Dimensions		 7.0 x 3.1 x 1.1"(160x80x30mm)
13.7 x 17.7 x 5.9"(350x450x150mm)

Manual UCI Probe Specifications:

Probe Type/Model PHT-6001 PHT-6002 PHT-6005 PHT-6010
Loading Force 1kgf (10N) 2kg (20N) 5kg (50N) 10kg (98N)
Probe Diameter
Length
Oscillating Rod Diameter		 22mm
154mm
2.4mm		 22mm
154mm
2.4mm		 22mm
154mm
3mm		 22mm
154mm
3mm
Surface Roughness Requirements
?m=Metric ?in= Inch		 Ra<3.2?m
(Ra<125 ?in)		 Ra<5?m
(Ra<197 ?in)		 Ra<10 ?m
(Ra<393 ?in)		 Ra<15 ?m
(Ra<590 ?in)
Min weight of test sample
Minimum thickness of sample		 0.3kg (.66lbs)
2mm (.08")		 0.3kg (.66lbs)
2mm (.08") 		0.3kg (.66lbs)
2mm (.08") 		0.3kg (.66lbs)
2mm (.08")

Motorized UCI Probe Specifications:

Probe Type/Model PHT-6030 PHT-6080 PHT-6100
Loading Force .30kg (3N) .80kg (8N) 1kgf (10N)
Probe Diameter 46mm 46mm 46mm
Length 198mm 198mm 198mm
Oscillating Rod Diameter 3.7mm 3.7mm 3.7mm
Surface Roughness Ra<3.2?m Ra<5 ?m Ra<8 ?m
Requirements
?m=Metric ?in= Inch 		(Ra<125 ?in) (Ra<197 ?in) (Ra<314 ?in)
Min weight of test sample 0.3kg (.66lbs) 0.3kg (.66lbs) 0.3kg (.66lbs)
Minimum thickness of sample 2mm (.08") 2mm (.08") 2mm (.08")

Indentation Depth (?m)

Hardness .30kg Motorized .80kg Motorized 1kg Motorized 1kg Manual 2kg Manual 5kg Manual 10kg Manual
800HV 4 5 7 7 10 15 22
600HV 4 5 8 8 11 18 25
500HV 5 6 9 9 12 19 27
300HV 6 8 11 11 16 25 35
100HV 10 13 19 19 27 43 61

OPTIONAL ACCESSORIES:

Special Application Impact Devices

Impact Device DPart No. PHT1800-100
Universal standard device:

Use for the majority of hardness testing assignments

Impact Device DLPart No. PHT1800-115

Tip 4mm diameter x 1.96" length Measurements in extremely confined spaces

Impact Device GPart No. PHT1800-125
Enlarged test tip:

For use on solid heavy components such as; rough castings and forgings. Brinell only.

Impact Device DCPart No. PHT1800-120
Extremely short impact device

Used for very confined spaces such as holes, cylinders, internal measurements

Impact Device D+15Part No. PHT1800-110
Slim front section with coil set back

Hardness measurements in grooves, recessed surface

Impact Device CPart No. PHT1800-130
Reduced impact energy

For testing case hardened material

Specifications for impact devices

Impact devices -> D/DC/DL D+15 C G
Impact energy 11Nmm 11Nmm 3Nmm 90Nmm
Mass of the impact body 5.5g 7.8g 3.0g 20g
DL: 7.2g
Test tip
* Hardness 1600HV 1600HV 1600HV 1600HV
* Diameter 3mm 3mm 3mm 5mm
* Material Tungsten Tungsten
* carbide carbide
* carbide carbide
Impact device
* Diameter 20mm 20mm 20mm 30mm
* Length 147/86mm 162mm 141mm 254mm
* Weight 75/50g 80g 75g 250g
Max. hardness of sample 940HV 940HV 1000HV 650HB
Preparation of surface
* Max. roughness depth Rt 10 µ m 10 µ m 2.5 µ m 30 µ m
* Average roughness Ra 2 µ m 2 µ m 0.4 µ m 6.3 µ m
Min. weight of sample 5kg 5kg 1.5kg 15kg
Min. thickness of sample
* STEEL 25mm 25mm 25mm 25mm
Indentation of test tip
With 300 HV
* Diameter 0. 54mm 0. 54mm 0. 38mm 1.03mm
* Depth 24 µ m 24 µ m 12 µ m 53 µ m
With 600 HV
* Diameter 0. 45mm 0. 45mm 0. 32mm 0. 90mm
* Depth 17 µ m 17 µ m 8 µ m 41 µ m
with 800 HV
* Diameter 0. 35mm 0. 35mm 0. 30mm -
* Depth 10 µ m 10 µ m 7 µ m -
Support StandPart No. MET-1000

 



Small Cylinder Support Ring(8-22mm diameter)

Part No. PHT6000-521



CYLINDER SUPPORT for MOTORIZED PROBE

Part No. PHT6000-751



Deep Hole Probe Cap(5.53mm diameter/15.5 deep)

Part No. PHT6000-541

Optional Hardness Test Blocks for 6000 Series

NIST Certified Hardness Test Block Kit

Part No. 900330-9410

Includes: 1pc HRC 20’s
1pc HRC 40’s
1pc HRC 60’s

Full form cert for each block

Aluminum/Brass Rockwell Blocks

Part No. Description Shape Range Comments
900330-9414AH Rockwell B Square 80’s Made in USA Aluminum
900330-9414AL Rockwell B Square 50’s Made in USA Aluminum
900330-9418H Rockwell E Square 90’s Made in USA Aluminum
900330-9418L Rockwell E Square 60’s Made in USA Aluminum
900330-9414BH Rockwell B Square 80’s Made in USA Brass
900330-9414BL Rockwell B Square 50’s Made in USA Brass

Leeb Hardness Test Blocks

Part No. Description Shape Range Comments
PHT1300-01 Leeb “D" Hardness Test Block Round 750-800(HRC 50’s) Phase II std.
PHT130001-cert Leeb “D" Hardness Test Block Round 750-800(HRC 50’s) NIST Certified
PHT1300-02 Leeb “D" Hardness Test Block Round 590-670(HRC40’s) Phase II std.
PHT130002-cert Leeb “D" Hardness Test Block Round 590-670(HRC40’s) NIST Certified
PHT1300-03 Leeb “D" Hardness Test Block Round 590-670(HRC40’s) Phase II std.
PHT130003-cert Leeb “D" Hardness Test Block Round 490-570(HRC20’s) NIST Certified
PHT1100G-01 Leeb “G" Hardness Test Block Round 480-670 For use with “G" impact devices
PHT1100G-01C Leeb “G" Hardness Test Block ASTM Certified to Brinell Round 480-670 (HB200’s) For use with “G" impact devices

Brinell Hardness Test Blocks

Part No. Description Shape Range Comments
900355-1000/150 3000kg Round 150-250 Phase II std. (Steel)
900355-1000/250 3000kg Round 250-500 Phase II std. (Steel)
900355-3010 3000kg Rectangle Low Aluminum (USA)
900355-3020 3000kg Rectangle High Aluminum (USA)
900355-3030 3000kg Rectangle 100-200HB Steel (USA)
900355-3040 3000kg Rectangle 250-350HB Steel (USA)
900355-3050 3000kg Rectangle 500+HB Steel (USA)

 

 

HARDNESS TESTER RESOURCES

Vous pouvez aussi aimer

Visionné récemment