California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
Portable Hardness Tester Accessories/HLD-HLG Hardness Test Blocks/Probes for Portable Hardness Testers
A full compliment of Accessories for portable hardness testers including:
- Impact Devices/Probes and probe attachments
- Ring Sets
- Portable Hardness Tester Blocks/Hardness Test blocks
Impact Devices:
D-Probe: MODEL NO. PHT1800-100
Universal standard unit. Will handle the majority of hardness testing applications.
Weight:75g
D+15-Probe: MODEL NO. PHT1800-110
Very narrow contact area with a set back measurement coil. This device is used to measure hardness in grooves and recessed surfaces.
Weight: 80g
DL -Probe: MODEL NO. PHT1800-115
This model features a needle front section with a diameter of 4mm and a length of 50mm. It is suitable for testing in extremely confined spaces, the base of grooves and on special components such as as gear wheels. For use on steel and cast steel only!
DC-Probe: MODEL NO. PHT1800-120
Very short impact device for those confined areas, i.e. inside bores for internal measurements. Conforms to the D measuring range. Weight: 50g
G-Probe: MODEL NO. PHT1800-125
This device has an enlarged test tip, and an increased impact energy range (approx. 9 times the D, 72 ft-lb.). Can be used on lower quality finishes for measuring hardness in the Brinell range only (max. 650 HB). Designed to be used with heavy components such as heavy castings and forgings.
Weight: 250g
C-Probe: MODEL NO. PHT1800-130
A reduced impact energy impact device(approximately ¼ of the D Type 2 ft-lb.) for measuring the hardness of surface hardened components, coatings, thin wall or impact sensitive components. Applies a small superficial indentation.
Weight: 75g
Cable for impact devices MODEL NO. PHT1800-102
Technical Data for Portable Hardness Tester Impact Devices
Note: Impact device D is standard device on all models. Specification is identical.
| Display type | D/DC/DL | D+15 | C | G |
|---|---|---|---|---|
| Impact energy | 11Nmm | 11Nmm | 3Nmm | 90Nmm |
| Mass of the impact body | 5. 5g | 7. 8g | 3. 0g | 20g |
| DL: 7.3g | ||||
| Test tip | ||||
| * Hardness | 1600HV | 1600HV | 1600HV | 1600HV |
| * Diameter | 3mm | 3mm | 3mm | 5mm |
| * Material | Tungsten | Tungsten | ||
| * | carbide | carbide | ||
| Impact device | ||||
| * Diameter | 20mm | 20mm | 20mm | 30mm |
| * Length | 147/86mm | 162mm | 141mm | 254mm |
| * Weight | 75/50g | 80g | 75g | 250g |
| Max. hardness of sample | 940HV | 940HV | 1000HV | 650HB |
| Preparation of surface | ||||
| * Roughness class ISO | N7 | N7 | N5 | N9 |
| * Max. roughness depth Rt | 10 µ m | 10 µ m | 2.5 µ m | 30 µ m |
| * Average roughness Ra | 2 µ m | 2 µ m | 0. 4 µ m | 7 µ m |
| Min. weight of sample | ||||
| * Of compact shape | 5kg | 5kg | 1.5kg | 15kg |
| * On solid support | 2kg | 2kg | 0.5kg | 5kg |
| * Coupled on plate | 0. 1kg | 0. 1kg | 0. 02kg | 0. 5kg |
| Min. thickness of sample | ||||
| * Coupled | 3mm | 3mm | 1mm | 10mm |
| * Min. thickness of layers | 0. 8mm | 0. 8mm | 0. 2mm | – |
| * Indentation of test tip | ||||
| * With 300 HV | ||||
| * Diameter | 0. 54mm | 0. 54mm | 0. 38mm | 1.03mm |
| * Depth | 24 µ m | 24 µ m | 12 µ m | 53 µ m |
| * With 600 HV | ||||
| * Diameter | 0. 45mm | 0. 45mm | 0. 32mm | 0.90mm |
| * Depth | 17 µ m | 17 µ m | 8 µ m | 41 µ m |
| * With 800 HV | ||||
| * Diameter | 0. 35mm | 0. 35mm | 0. 30mm | – |
| * Depth | 10 µ m | 10 µ m | 7 µ m | – |
For Testing on Round Parts
12pc Universal Support Ring Set For Portable Hardness Testers
This set is designed to let the user confidently test on round (Concave or Convex) parts. Simple threaded
design for quick change in the shop or out in the field.
MODEL NO. PHT1500-300
Set Consist of:1pc Universal Stand plus the following:
Concave Support Rings
| 11-13mm round | 12.5-17mm round | 16.5-30mm round |
| 11-13mm square | 12.5-17mm square | 16.5-30mm square |
Convex Support Rings
| 10-15mm round | 14.5 – 30mm round | |
| 10-15mm square | 14.5 – 30mm square | 25-50mm square |
Calibrated Leeb Test Blocks
For all Leeb Portable Hardness Testers
HLD Test Block (for use with all “D” type Impact Devices)
Range: 750-800 (50’s HRC)
Model No. PHT1300-01
Model No. PHT130001-CERT: NIST Certified (HRC)
HLD Test Block (for use with all “D” type Impact Devices)
Range: 590-670 (40’s HRC)
Model No. PHT1300-02
Model No. PHT130002-CERT: NIST Certified (HRC)
HLD Test Block (for use with all “D” type Impact Devices)
Range: 490-570 (20’s HRC)
Model No. PHT1300-03
Model No. PHT130003-CERT: NIST Certified(HRC)
HLD Test Block Double Sided (for use with all “D” type
Impact Devices) Range: 750-800 (60’s HRC)
Model No. PHT1300-05
Leeb Test Blocks for “G” Impact device
HLG Test Block (for use with large “G” Impact Device)
Model No. PHT1100G-01
Model No. PHT1100G-CERT: ASTM Certified(Brinell)
