WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
The CM-01 is easy to set up and easy to use . This is the machine if your a shop owner who wants to sharpen his own tools
Designed in 1972 there are about 35000 of these units in the field, with many accessories in the market this is a proven intuitive easy to use platform.
This single-speed, reversing grinder is the latest version of the tried and true CUTTERMASTER Tool and Cutter Grinder. Previous Models were the FCG-30, MG-30, HDT-30, and GD-66. The CM-01 is the current North American built model.
This package includes an aluminum oxide grinding wheel, a tool kit, an operator’s manual and can sharpen ends and flutes of up to 2″ x 10″End Mills.
This is a great machine for grinding the ends and flutes of end mills. With the addition of accessories, you can grind countersinks (CM-CSJ Countersink Cam Set), corner radiuses (CM-03 Radius Attachment). Drills, Large drills up to 3 inch, Reamers, Single lip cutters, Router bits.
CM-01 versus the Journeyman JX. The main difference between the CM-01 and the more advanced Journeyman JX models, is that the JX has a larger motor, variable speed whisper drive, the added ability to swivel the motorhead 360 degrees allowing for additional set-ups.
The above video shows the JX but the setup and operation would be the same for the CM-01
CM-01 (CM-01V) Specifications
| Air Bearing Stroke | 6.5 (10.5″ optional) |
| Air Bearing Swing Over Table | 9.8″ (248.92) |
| Cutting Tool Capacity | 2″ shank, 9.8″ O.D. |
| Flute Length | 6.5″ Standard or 10 inch″ |
| T-Slot Dimension | 0.8″ (20.32mm) x 0.5″ (12.7mm) x 0.67″ (17.018mm) |
| Table Feed Gradations | 0.001″ (0.02mm) |
| X-Axis Table Travel | 6″ (152.4mm) |
| Y-Axis Table Travel | 3″ (76.2mm) + sildes back & forth 6″ (152.4mm) |
| X-Axis Table Working Space | 16.5″ (419.1mm) x 5.5″ (139.7mm) |
| Y-Axis Table Working space | 13″ (330.2) x 5.5″ (139.7) |
| Wheel | 5″ x 1.25″ cup or 6″ dish with Z-axis |
| Motor Tilt | +35° -8° |
| Power /Motor | 110v / 60Hz or 220v 50Hz — 350W, 3800 rpm, DC PM Rev |
| Net Weight | 180lbs (82Kg) |
| Gross Weight | 232lb (106Kg) |
| Machine Dimensions excluding handles | 21″ x 20″ x 21″ |
| Shipping Dimensions | 30″ x 28″ x 29″, 230lbs |
