California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
Gorilla 4 Flute Square End GMX-35 Coated End Mills, Inch, High Performance,
Made in USA.
- Patented variable flute and index design which reduces chatter and vibration.
- Recommended for aggressive machining applications in all materials including,
stainless, inconel, titanium, tool steels and hardened materials. Should be run at specific parameters. - Produced with the highest Transverse Rupture
- Strength (TRS) nano-grain carbide substrate available.
-
Should be run at specific parameters. See “Speeds and Feeds” chart HERE.
Gorilla coatings:
- are just a few thousandths of a millimeter thick but harder than steel; these low-friction coatings are extremely wear-resistant and chemically inert. The optimum coating is determined on the basis of both conditions of use and economic considerations.
About the GMX-35 Coating:
Special high-performance coating for high speed machining. GMX-35 performance surpasses all conventional coatings. This universal high-performance coating is especially designed for milling and drilling. Also suitable for dry machining.
- Structure: Gradient
- Nanohardness (GPa): 32
- Friction (fretting) Coefficient: 0.35
- Thickness (µm): 2-4
- Maximum Working Temperature: 1100° C (2012° F)
- Color: Silver-Gray
Cutting Materials:
- Gray Cast Iron, Ductile Iron, Soft Steels, (A36,1018, 8620,1045), Alloy Steels, (4340, 4140), 4140 Pre-Hard (38 to 42 Rc), Tool Steels (A2,D2,S7), Die Steels, (H13,P20), Stainless Steel, (303, 304, 316), Difficult Stainless Steel, (400 & PH Series), Stainless Steel (13-8), High Temperature Alloys, Titanium (6AL4V), Inconel 718, Inconel 625
Machining Method:
Tolerance:
- Cut Dia +.000/-.002,
- Shank Dia -.0001/-.0005,
- LOC +.025/+.050,
- OAL +/-.050
Dimensions:
STANDARD Tool Length
|
ACCUSIZE SKU |
Gorilla Mill SKU |
D1 |
D2 |
|
|
Coating |
|
0001-0305 |
GM18F4 |
1/8 |
1/8 |
1/2 |
1-1/2 |
GMX-35 |
|
0001-0535 |
GM532F4 |
5/32 |
3/16 |
1/2 |
2 |
GMX-35 |
|
0001-0344 |
GM316F4 |
3/16 |
3/16 |
5/8 |
2 |
GMX-35 |
|
0001-0248 |
GM14F4 |
1/4 |
1/4 |
3/4 |
2-1/2 |
GMX-35 |
|
0001-0502 |
GM516F4 |
5/16 |
5/16 |
7/8 |
2-1/2 |
GMX-35 |
|
0001-0456 |
GM38F4 |
3/8 |
3/8 |
7/8 |
2-1/2 |
GMX-35 |
|
0001-0592 |
GM716F4 |
7/16 |
7/16 |
1 |
2-1/2 |
GMX-35 |
|
0001-0157 |
GM12F4 |
1/2 |
1/2 |
1-1/4 |
3 |
GMX-35 |
|
0001-0540 |
GM58F4 |
5/8 |
5/8 |
1-1/4 |
3-1/2 |
GMX-35 |
|
0001-0364 |
GM34F4 |
3/4 |
3/4 |
1-1/2 |
4 |
GMX-35 |
|
0001-0044 |
GM10F4 |
1 |
1 |
1-1/2 |
4 |
GMX-35 |
