California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
MDJN R/L Toolholders with DNMG432 Carbide Inserts
- 3° side cutting edge angle
- For turning, facing and copying
- Accept negative 55° diamond DNMG DNMA inserts
- With 10 pcs of DNMG432 Carbide Inserts
|
Item SKU# |
Right/Left Hand |
Tool holder (SKU#) |
Shank Square (A & B) | F |
OAL |
Inserts | Finger Clamp | Clamp Screw | Locking Pins | Shims |
Inserts (SKU#) |
|
| I.C. | T | |||||||||||
| 2302-5020INS | Right |
MDJN R-16-4D (2302-5020) |
1" | 1.25" | 6" | 1/2" | 3/16" | CL-30 | XNS0829 | NL-0617 | D1504B |
With 10 DNMG CVD Coated (2206-1028) |
| 2302-6020INS | Left |
MDJN L-16-4D (2302-6020) |
1" | 1.25" | 6" | 1/2" | 3/16" | CL-30 | XNS0829 | NL-0617 | D1504B |
With 10 DNMG CVD Coated (2206-1028) |
Carbide Inserts
DNMG432 Carbide Inserts CVD Coated Black/Yellow 10 ps/box, #2206-1028
- CVD Coated
- Insert Grade: BPS101
- Chip Breaker: MD
- Material: Carbide
- DNMG
- Coating: CVD Al2O3 TICN
- Machining Parts Material: Steel
- Machining Process: finish
Product features
- BPS101 Black/Yellow
- Coating Grade: CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness.
- Can bear high temperatures.
- For steel and steel castings finishing to roughing processing.
- Continue cutting to light-interrupted cutting. Machining of gray and ductile iron at low to medium cutting speed.
- For hard materials, continuous cutting and light-interrupted cutting from finishing to roughing.
- Wet and dry processing.
- The combination of fibrous TICN and fine-grained Al2O3 increases abrasion resistance and anti-chipping.
- Preferred choice chip breaker on General Purpose Finishing
Features of chip breaker
- For medium-duty turning
- With the broad capability for steel, stainless steel, gray and nodular cast-iron
- Operations: turning, facing and profiling
- Advantages: all-round, reliable with problem-free machining
- Limitations: depth of cut and feed, risk of overloading the cutting edge
- Components typically: axles, shafts, hubs, gears, etc.
| Item # | ANSI # | I.S.O. # | I.C | Thickness | Hole | Radius |
| 2206-1028 | DNMG432-MD | DNMG150608-MD | 1/2'' | 1/4'' | 13/64'' | 1/32'' |
