California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
-
MTENN Toolholders with TNMG Carbide Inserts
- For facing
- Negative rake
- 30° end cutting edge angle
- TNMG Carbide inserts
** For purchasing additional inserts, you may find the corresponding Insert SKU below:
Item SKU# Tool holder (SKU#) Shank Square F OAL
(C)Inserts Finger Clamp Clamp Screw Locking Pins Shims I.C. Included Insert (SKU#) Compatible but not included Insert (SKU#)
Thickness 2313-5014INS MTENN-10-3B
(2313-5014)
5/8" 5/16" 4-1/2" 3/8" CVD Coated TNMG332-MD, (2222-1034) TiN Coated TNMG332, (2122-1034) 3/16" CL-6 XNS-0520 NL-0414 T1603B 2313-5016INS MTENN-12-3C
(2313-5016)
3/4" 3/8" 4-1/2" 3/8" TiN Coated TNMG332, (2122-1034) CVD Coated TNMG332-MD, (2222-1034) 3/16" CL-6 XNS-0829 NL-0414 T1603B 2313-5020INS1 MTENN-16-4D
(2313-5020)
1" 1/2" 6" 1/2" TiN Coated TNMG432,(2122-1036) CVD Coated TNMG432-MD, (2222-1036) 3/16" CL-12 XNS-0829 NL-0617 T2203B 2313-5020INS2 MTENN-16-4D
(2313-5020)
1" 1/2" 6" 1/2" CVD Coated TNMG432-MD, (2222-1036) TiN Coated TNMG432,(2122-1036) 3/16" CL-12 XNS-0829 NL-0617 T2203B 
Inserts
TNMG, Carbide Inserts, Tin Coated, 10 Pcs/Set
- ANSI #: TNMG332
- ISO #: TNMG160408
- Insert Style: TNMG
- Insert Size: 332
- IC: 3/8"
- Thickness: 3/16"
- Thru-Hole: 0.15"
- Radius: 1/32
Item Description 2122-1034 C5 Grade Coated, TNMG332
TNMG Carbide Inserts CVD Coated Black/Yellow 10 ps/box
- CVD Coated
- Insert Grade: BPS101
- Chip Breaker: MD
- Material: Carbide
- Coating: CVD Al2O3 TICN
- Machining Parts Material: Steel
- Machining Process: finish
Product features
- BPS101 Black/Yellow
- Coating Grade: CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness
- Can bear high temperatures
- For steel and steel castings finishing to roughing processing
- Continue cutting to light interrupted cutting. Machining of gray and ductile iron at low to medium cutting speed
- For hard materials, continuous cutting and light interrupted cutting from finishing to roughing
- Wet and dry processing
- Combination of fibrous TICN and fine-grained Al2O3 increases abrasion resistance and anti-chipping
- Preferred choice chip breaker on General Purpose Finishing
Features of chip breaker
- For medium-duty turning
- With the broad capability for steel, stainless steel, grey and nodular cast-iron
- Operations: turning, facing and profiling
- Advantages: all-round, reliable with problem-free machining
- Limitations: depth of cut and feed, risk of overloading the cutting edge
- Components typically: axles, shafts, hubs, gears, etc.
Item # ANSI # I.S.O. # I.C Thickness Hole Radius 2222-1034 TNMG332-MD TNMG160408-MD 3/8'' 3/16'' 5/32'' 49/64'' 2222-1036 TNMG432-MD TNMG220408-MD 1/2'' 3/16'' 13/64'' 1/32'' 
