California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
-
MWLN R/L Toolholders with Carbide Inserts
- Negative 5° end or side cutting edge angle
- For turning, facing and copying
- Accept negative 80° trigon WNMG inserts
- Each holder comes with 10 pieces of TiN coated or CVD coated carbide inserts
** For purchasing additional inserts, you may find the corresponding Insert SKU below:
Item
SKU #
Right/Left Hand Toolholder (SKU#) Shank Square (A & B) F OAL
(C)Inserts
Finger Clamp Clamp Screw Locking Pins Shims I.C. Thickness Included Insert (SKU#)
Compatible but not included Insert (SKU#)
2316-0008INS1 Right MWLN R-12-4C (2316-0008) 3/4" 1" 5'' 1/2'' 3/16" CVD Coated WNMG432-MD (2233-1022) TiN Coated WNMG432 (2133-1022)
CL-6 XNS-0520 ZX617
(0028-0617)
W08B 2316-0008INS2 Right MWLN R-12-4C (2316-0008) CVD Coated WNMG432-MD (2233-1022) TiN Coated WNMG432 (2133-1022) 2316-1008INS Left MWLN L-12-4C
(2316-1008)
CVD Coated WNMG432-MD (2233-1022) (TiN Coated WNMG432, 2133-1022) 2316-0012INS Right MWLN R-16-4D
(2316-0012)
1" 1-1/4" 6" 1/2" 3/16" CVD Coated WNMG432-MD (2233-1022) TiN Coated WNMG432 (2133-1022)
CL-12 XNS-0829 ZX617
(0028-0617)
W08B 2316-1012INS Left MWLN L-16-4D
(2316-0012)
CVD Coated WNMG432-MD (2233-1022)
TiN Coated WNMG432 (2133-1022) 
Carbide Inserts
WNMG432, Carbide Inserts, Tin Coated, 10 Pcs/Set
- Carbide Inserts
- C5 Grade Coated
- ANSI #: WNMG432
- ISO #: WNMG080408
- Insert Style: WNMG
- Insert Size: 432
- I.C.: 1/2"
- Thickness: 3/16"
Item Description 2133-1022 C5 Grade Coated, WNMG080408
Carbide inserts, CVD Coating, WNMG, Black/Yellow, 10 ps/box
- For Turning & Boring
- Material: Carbide
- Coating: CVD Al2O3 TICN
- Insert Grade: BPS101
- Chip Breaker: MD
- Machining Parts Material: Steel
- Machining Process: finish
Product features
- BPS101 Black/Yellow Coating Grade
- CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness
- Can bear high temperatures. For steel and steel castings finishing to roughing processing
- Continue cutting to light interrupted cutting
- Machining of gray and ductile iron at low to medium cutting speed
- For hard materials, continuous cutting and light interrupted cutting from finishing to roughing
- Wet and dry processing
- Combination of fibrous TICN and fine-grained Al2O3 increases abrasion resistance and anti-chipping
- Preferred choice chip breaker on General Purpose Finishing
Features of chipbreaker
- For medium-duty turning
- With broad capability for steel, stainless steel, grey and nodular cast-iron
- Operations: turning, facing and profiling
- Advantages: all-round, reliable with problem-free machining
- Limitations: depth of cut and feed, risk of overloading the cutting edge
- Components typically: axles, shafts, hubs, gears, etc.
Item # ANSI # I.S.O. # I.C. Thickness Hole Radius 2233-1022 WNMG432-MD WNMG080408-MD 1/2" 3/16" 13/64" 1/32" 
-
Product NameMaterial Number
-
Product NameMaterial Number
