900-355, Testeur de dureté Brinell motorisé numérique

• Load Cell driven system provides precise control of test force application
• Direct digital reading
• Engineered to obtain highly sensitive and accurate readings
• Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
• Measuring Range: 8-650HBW

• Innovative closed-loop technology. The Brinell hardness tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.
• The whole weight of the tester is 50% less than the traditional dead weights type tester.
• Test load selection by keyboard and LCD screen.
• Fully automatic test cycles. The Brinell hardness Tester features a fully automatic test cycle, load application, holding, unloading, is performed fully automatically. This greatly improves reproducibility of test results since operator influence is eliminated.
• Selectable dwell times by screen. The indenter, load, and other test information are shown clearly on the large LCD screen.
• The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen.
• Equipped with a 20X optical microscope to measure the diameter of Brinell indention.
• Brinell Hardness Calculator (BHC) make the hardness value calculation easier and convenient.

Options:

• NIST/ASTM certified hardness test blocks, penetrators and kits are available.

Loads: 3000kgf (29400N), 1500Kgf (14700N), 1000Kgf (9800N), 750Kgf(7355N),500Kgf (4900N),
250Kgf (2452N), 187.5Kgf (1839N), 125Kgf (1226N),100Kgf (980N), 62.5Kgf(612.9N)

Load dwell duration: 2s?99s, can be set and stored

Tungsten Carbide Ball indenter: 10mm, 5mm, 2.5mm

Measuring range: 8-650HBW

Magnification of the microscope: 20X

Resolution capability of the microscope: 0.005mm

Max measurable height: 230 mm

Max measurable depth: 140 mm

Dimensions: 530mm×260mm×750mm

Power supply: 220/110 V, 50/60 Hz, 4A Prior to ship, please advise power setting needed.

Weight: 110kg

Standard blocks: 125-350HBW10/3000, 125-350HBW10/1000

HARDNESS TESTER RESOURCES

• HARDNESS TESTER ACCESSORIES
• HARDNESS TEST BLOCK CERTIFICATION
• REBUILT INVENTORY W/ FULL WARRANTY
• PHASE II WARRANTY CARD
• PHASE II SAMPLE EVALUATION SHEETS
• HARDNESS TESTER CONVERSION CHART
• PRINCIPLE OF ROCKWELL HARDNESS TESTING
• ROUNDNESS CORRECTION CHART FOR HARNDESS TESTING

• PORTABLE HARDNESS TESTERS
• MINIMUM THICKNESS CHART FOR ROCKWELL HARDNESS TESTING
• ROCKWELL HARDNESS SCALE INDENTOR LOAD CHART
• HARDNESS SETUP
• 900-331
• NIST LINKS
• NIST SCALE HISTORY
• ASTM LINKS