California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
-
Fully Machined Lathe Chuck Back Plate, D1 Type Adapter for Most 4 Jaw Independent Chucks
- Need machining the backplate shoulders based on different 4 jaw independent chucks
- The backplate outside diameter is smaller than the lathe chuck diameter due to the mounting holes being towards the center of the lathe chuck, then the recess diameter D2 of the lathe chuck still provides a tight fit.
- The back plate shoulder requires machining. For instructions on truing back plate.
Item
Chuck
Spindle
A
C
D
E
F
G
Taper
2600-0162
6"
D1-3
6.299"
2.125"
2.779"
2.125"
2.795"
0.157"
2600-0163
6"
D1-4
6.299"
2.500"
3.251"
2.125"
2.795"
0.157"
2600-0164
6"
D1-5
6.299"
3.250"
4.125"
2.125"
2.795"
0.157"
2600-0165
8"
D1-3
6.299"
2.125"
2.779"
2.992"
3.740"
0.196"
2600-0166
8"
D1-4
6.299"
2.500"
3.251"
2.992"
3.740"
0.196"
2600-0167
8"
D1-6
7.086"
4.187"
5.251"
2.992"
3.740"
0.196"
2600-0168
10"
D1-6
7.086"
4.187"
5.251"
4.370"
5.118"
0.196"
2600-0169
10"
D1-8
8.346"
5.500"
6.748"
4.370"
5.118"
0.196"
Short taper No.
Size of screw thread
Piece of stud
Dia.of stud
D3
M10 x 1
3
9/16"
D4
M10 x 1
3
5/8"
D5
M12 x 1
6
3/4"
D6
M16 x 1.5
6
7/8"
D8
M20 x 1.5
6
1"
-
Product NameMaterial Number
