Porte-outils MDJN R/L avec inserts en carbure supplémentaires DNMG-432

1'' by 6'' Mdjn R-16-4D Toolholder, Right Hand, with 1 Piece Dnmg432 Insert Installed, 2302-5020

1'' by 1-1/4'' Oal Mdjn Tool Holder, Left Hand with Dnmg432 Carbide Inserts, 2302-6020

Carbide Inserts Cvd Coating Dnmg432, 10 Pcs/Box, Black/Yellow, 6206-1028

Passez votre souris pour zoomer Cliquez sur l'image pour zoomer

Porte-outils MDJN R/L avec inserts en carbure supplémentaires DNMG-432

Accusize Industrial ToolsSKU: 2302-5020INS

Shank Square and Model: MDJN R-16-4D 1"x6" Droite avec insert DNMG432 (2302-5020INS)

Prix:

$349.00

Quantité:

WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.

For more information, visit www.P65Warnings.ca.gov

Méthodes de paiement

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Sécurité

Informations produit supplémentaires

Aperçu

MDJN R/L Toolholders with DNMG432 Carbide Inserts

3° side cutting edge angle
For turning, facing and copying
Accept negative 55° diamond DNMG DNMA inserts
With 10 pcs of DNMG432 Carbide Inserts

Item

SKU#

Right/Left Hand

Tool holder

(SKU#)

Shank Square (A & B)

OAL
(C)

Inserts

Finger Clamp

Clamp Screw

Locking Pins

Shims

Inserts

(SKU#)

I.C.

2302-5020INS

Right

MDJN R-16-4D

(2302-5020)

1.25"

1/2"

3/16"

CL-30

XNS0829

ZX619

D1504B

With 10 DNMG CVD Coated

(2206-1028)

2302-6020INS

Left

MDJN L-16-4D

(2302-6020)

1.25"

1/2"

3/16"

CL-30

XNS0829

ZX619

D1504B

With 10 DNMG CVD Coated

(2206-1028)

Diagram of MDJN TOOL HOLDER

Carbide Inserts

DNMG432 Carbide Inserts CVD Coated Black/Yellow 10 ps/box, #2206-1028

CVD Coated
Insert Grade: BPS101
Chip Breaker: MD
Material: Carbide
DNMG
Coating: CVD Al2O3 TICN
Machining Parts Material: Steel
Machining Process: finish

Product features

BPS101 Black/Yellow
Coating Grade: CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness.
Can bear high temperatures.
For steel and steel castings finishing to roughing processing.
Continue cutting to light-interrupted cutting. Machining of gray and ductile iron at low to medium cutting speed.
For hard materials, continuous cutting and light-interrupted cutting from finishing to roughing.
Wet and dry processing.
The combination of fibrous TICN and fine-grained Al2O3 increases abrasion resistance and anti-chipping.
Preferred choice chip breaker on General Purpose Finishing

Features of chip breaker

For medium-duty turning
With the broad capability for steel, stainless steel, gray and nodular cast-iron
Operations: turning, facing and profiling
Advantages: all-round, reliable with problem-free machining
Limitations: depth of cut and feed, risk of overloading the cutting edge
Components typically: axles, shafts, hubs, gears, etc.