Porte-outils SCLC R/L avec Extra 10 inserts en carbure CCMT avec revêtement CVD

Accusize Industrial ToolsSKU: 2370-6006INS

Shank Square and Model: 1/2" LH SCLC L-08-3A avec insert en carbure CCMT 32,51 (2370-6006INS)
Prix:
$94.00

Frais delivraison calculés à la caisse

Stock:
En stock

California Proposition 65 Warning

Paiement & Sécurité

Modes de paiement

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.


Sécurité

Estimer l'expédition

Description

SCLC R/L Toolholders with 10 pc CCMT Carbide CVD Coated Inserts

  • Negative 5° end or side cutting edge angle for a positive 80° diamond CCMT CCGX inserts

 ** For purchasing additional inserts, you may find the corresponding Insert SKU below:

Insert SKU# Right/Left Hand Model Shank Square (A & B) C F Inserts
2370-5004 Right SCLC R -06-2J 3/8" 3-1/2" 1/2" 10 pc CCMT 21.51
2370-5006  Right SCLC R -08-3A 1/2" 4" 5/8" 10 pc CCMT 32.51
2370-5008  Right SCLC R -10-3B 5/8" 4-1/2" 3/4" 10 pc CCMT 32.51
2370-5010  Right SCLC R -12-3B 3/4" 4-1/2" 1" 10 pc CCMT 32.51
2370-6008 Left SCLC L -06-2J 3/8" 3-1/2" 1/2" 10 pc CCMT 32.51
2370-6006 Left SCLC L -08-3A 1/2" 4" 5/8" 10 pc CCMT 32.51

 

DIAGRAM OF SCLC TOOL HOLDER

 

 

Carbide Inserts, CVD Coating, CCMT, Black/Yellow, 10 ps/box

Carbide Inserts, CVD Coating, CCMT

  • Insert Style: CCMT
  • 7 degree
  • Insert Grade: BPS101
  • Chip Breaker: MD
  • Material: Carbide
  • Coating: CVD Al2O3 TICN
  • Machining Parts Material: Steel
  • Machining Process: Finish

Product features

  • BPS101 Black/Yellow Coating Grade
  • CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness
  • Can bear high temperatures
  • For steel and steel castings finishing to roughing processing
  • Continue cutting to light interrupted cutting
  • Machining of gray and ductile iron at low to medium cutting speed
  • For hard materials, continuous cutting and light interrupted cutting from finishing to roughing
  • Wet and dry processing
  • Combination of fibrous TICN and fine-grained Al2O3 increases abrasion resistance and anti-chipping
  • Preferred choice chip breaker on General Purpose Finishing

Features of chip breaker

  • For medium-duty turning with broad capability for steel, stainless steel, grey and nodular cast-iron
  • Operations: turning, facing and profiling
  • Advantages: all-round, reliable with problem-free machining
  • Limitations: depth of cut and feed, risk of overloading the cutting edge
  • Components typically: axles, shafts, hubs, gears, etc.

 

ccmt-1.png

2200-1020-8.jpg

 

 

Vous pouvez aussi aimer

Visionné récemment