-
5C Shank ER Collet Chuck
- Made of high-grade tool steel.
- Hardened and precision ground.
- TIR: 0.0002".
Item Shank Type Gage
Length
(L)Collet Nut
Diameter
(D)
External Thread
(d)Internal Thread
(d1)Collet Capacity Nut Style 0223-0245 5C ER32 2.16" 1.97" 1.238"-20UNF 1.041"-24UNF 0.08"-0.787" Slotted 0223-0246 5C ER40 2.36" 2.48" 1.238"-20UNF 1.041"-24UNF 0.118"-1.023" Slotted Design, Assemble, and Dissemble of ER Collet Nut
Eccentric Design, ISO 15488:2003(E) Assemble Inspection Dissemble The inside of the ER collet nut is intentionally designed like off-centering to help mount the ER collet much easier. It is in accordance with the requirements listed in ISO 15488:2003(E). If it is made symmetrical, the ER collet with the diameter larger than the inside size of the collet nut cannot be installed. Insert the ER collet into the nut at an angle. Lock it onto the eccentric groove of the collet nut and push it in. (Insert the cutter right after the step, before connect it to the holder/chuck/arbor.)
Inspect the RPM of the ER collet, ER collet nut, ER collet holder/chuck/arbor, etc. Take out the tool bit, press the end of the ER collet until the collet off the position. Push it out of the nut. (after take out the nut out of the holder.) -
-
-
Product NameMaterial Number