California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
-
SCLC R/L Toolholders with 10 pc CCMT Carbide CVD Coated Inserts
- Negative 5° end or side cutting edge angle for a positive 80° diamond CCMT CCGT inserts
** For purchasing additional inserts, you may find the corresponding Insert SKU below
Item SKU# Right /Left Hand Toolholder
(SKU)
Shank Square (A & B) OAL (C) F Included Inserts (SKU)
Compatible but not included Insert (SKU)
Insert QTY 2370-5004INS Right SCLC R-06-2J
(2370-5004)
3/8" 3-1/2" 1/2" CCMT 21.5
(CVD Coated CCMT21.51-MD, 2200-1008)
CCMT 21.5
(TiN Coated CCMT21.51, 2100-1008)
10 2370-5006INS Right SCLC R-08-3A
(2370-5006)
1/2" 4" 5/8" CCMT 32.5
(CVD Coated CCMT32.52-MD, 2200-1016)
CCMT 32.5
(CVD Coated CCMT32.51-MD, 2200-1014)
10 2370-6006INS Left SCLC L-08-3A
(2370-6006)
2370-5008INS Right SCLC R-10-3B
(2370-5008)
5/8" 4-1/2" 3/4" CCMT 32.5
(CVD Coated CCMT32.52-MD, 2200-1016)
CCMT 32.5
(CVD Coated CCMT32.51-MD, 2200-1014)
10 2370-6008INS Left SCLC L-10-3B
(2370-6008)
2370-5010INS Right SCLC R-12-3B
(2370-5010)
3/4" 4-1/2" 1" CCMT 32.5
(CVD Coated CCMT32.52-MD, 2200-1016)
CCMT 32.5
(CVD Coated CCMT32.51-MD, 2200-1014)
10 
Carbide Inserts, CVD Coating, CCMT, Black/Yellow, 10 ps/box
- Insert Style: CCMT
- 7 degree
- Insert Grade: BPS101
- Chip Breaker: MD
- Material: Carbide
- Coating: CVD Al2O3 TICN
- Machining Parts Material: Steel
- Machining Process: Finish
Product features
- BPS101 Black/Yellow Coating Grade
- CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness
- Can bear high temperatures
- For steel and steel castings finishing to roughing processing
- Continue cutting to light interrupted cutting
- Machining of gray and ductile iron at low to medium cutting speed
- For hard materials, continuous cutting and light interrupted cutting from finishing to roughing
- Wet and dry processing
- Combination of fibrous TICN and fine-grained Al2O3 increases abrasion resistance and anti-chipping
- Preferred choice chip breaker on General Purpose Finishing
Features of chip breaker
- For medium-duty turning with broad capability for steel, stainless steel, grey and nodular cast-iron
- Operations: turning, facing and profiling
- Advantages: all-round, reliable with problem-free machining
- Limitations: depth of cut and feed, risk of overloading the cutting edge
- Components typically: axles, shafts, hubs, gears, etc.
-
Product NameMaterial Number
