California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.For more information, visit www.P65Warnings.ca.gov
Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
Description
Gorilla Mill KONG Ballnose End Mill Serials. Made in USA.
6 Flute (METRIC), Super Bitchin' Performance - Ferrous
- Variable flute and index design reducing chatter and vibration.
- Recommended for testosterone oozing aggressive profiling or 5 axis machining applications in tough materials.
- Produced with the highest Transverse Rupture Strength (TRS) nano-grain carbide
substrate available. - Available in special diameters, lengths and completely resharpenable.
- Should be run at specific parameters. See “Speeds and Feeds” chart HERE.
Available in GMS2 and WTF Coating
Gorilla coatings are just a few thousandths of a millimeter thick but harder than steel; these low-friction coatings are extremely wear-resistant and chemically inert. The optimum coating is determined on the basis of both conditions of use and economic considerations.
-
GMS2 Coating: Revolutionary PVD coating process. GMS² marks a breakthrough in PVD deposition technology. The performance and hardness stem from the coating’s unique structure. GMS² is specifically designed to punish high temp alloys.
- Structure: Gradient
- Nanohardness (GPa): 32
- Friction (fretting) Coefficient: 0.3
- Thickness (µm): 2-4
- Maximum Working Temperature: 1100° C (2012° F)
- Color: Bright-Gray
- Structure: Gradient
-
WTF Coating: High-end coating solution that offers superior oxidation resistance, high thermal stability, and exceptional wear resistance, making it perfect for machining challenging materials such as titanium, nickel-based alloys and stainless and hardened steel.
- Structure: Multilayer
- Nanohardness (GPa): 38
- Friction (fretting) Coefficient: 0.6
- Thickness (µm): 2-4
- Maximum Working Temperature: 1100° C (2012° F)
- Color: Bronze
- Structure: Multilayer
Cutting Materials:
- Gray Cast Iron, Ductile Iron, Soft Steels, (A36,1018, 8620,1045), Alloy Steels, (4340, 4140), 4140 Pre-Hard (38 to 42 Rc), Tool Steels (A2,D2,S7), Die Steels, (H13,P20), Stainless Steel, (303, 304, 316), Difficult Stainless Steel, (400 & PH Series), Stainless Steel (13-8), High Temperature Alloys, Titanium (6AL4V), Inconel 718, Inconel 625
Machining Method:
Tolerance:
- TOLERANCES (inch)
- Cut Dia +.000/-.002
- Shank Dia -.0001/-.0005
- LOC +.025/+.050
- OAL +/-.050
Dimensions:
| ACCUSIZE SKU | Gorilla Mill SKU |
D1 Cutting Dia. |
D2 Shank Dia. |
LOC | OAL | COATING |
| 0003-2354 | GMHT0600MMBS6 | 6mm | 6mm | 12mm | 50mm | GMS2 |
| 0003-2355 | GMHT0600MMBS6WTF | 6mm | 6mm | 12mm | 50mm | WTF |
| 0003-2352 | GMHT0600MMB6 | 6mm | 6mm | 19mm | 65mm | GMS2 |
| 0003-2353 | GMHT0600MMB6WTF | 6mm | 6mm | 19mm | 65mm | WTF |
| 0003-2358 | GMHT0800MMBS6 | 8mm | 8mm | 12mm | 50mm | GMS2 |
| 0003-2359 | GMHT0800MMBS6WTF | 8mm | 8mm | 12mm | 50mm | WTF |
| 0003-2356 | GMHT0800MMB6 | 8mm | 8mm | 22mm | 65mm | GMS2 |
| 0003-2357 | GMHT0800MMB6WTF | 8mm | 8mm | 22mm | 65mm | WTF |
| 0003-2360 | GMHT1000MMB6 | 10mm | 10mm | 25mm | 75mm | GMS2 |
| 0003-2361 | GMHT1000MMB6WTF | 10mm | 10mm | 25mm | 75mm | WTF |
| 0003-2364 | GMHT1200MMBS6 | 12mm | 12mm | 19mm | 63mm | GMS2 |
| 0003-2365 | GMHT1200MMBS6WTF | 12mm | 12mm | 19mm | 63mm | WTF |
| 0003-2362 | GMHT1200MMB6 | 12mm | 12mm | 32mm | 75mm | GMS2 |
| 0003-2363 | GMHT1200MMB6WTF | 12mm | 12mm | 32mm | 75mm | WTF |
| 0003-2382 | GMHT1600MMB6 | 16mm | 16mm | 41mm | 89mm | GMS2 |
| 0003-2383 | GMHT1600MMB6WTF | 16mm | 16mm | 41mm | 89mm | WTF |
| 0003-2384 | GMHT2000MMB6 | 20mm | 20mm | 41mm | 100mm | GMS2 |
| 0003-2385 | GMHT2000MMB6WTF | 20mm | 20mm | 41mm | 100mm | WTF |
