California Proposition 65 Warning
WARNING: This product may contain materials and/or chemicals such as arsenic, lead, and others that are known by the state of California to cause cancer and/or reproductive problems.Paiement & Sécurité
Modes de paiement
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Sécurité
Estimer l'expédition
-
Ultrasonic Portable Hardness Tester
UCI/Dynamic Hardness Tester
Series 6000
Non-Destructive Hardness Testing
Features:
- Non-Destructive hand held portable hardness tester
- Combines UCI and Leeb portable hardness testing in one state of the art device
- Test steel with min thickness of .08" and unlimited max thickness (Other materials may have larger minimum thickness levels, depending on hardness)
- Blazing fast test results
- Rockwell, Brinell and Vickers hardness test conversions shown on display
- Large Memory w/USB Output
- Choice of manual UCI probes; 1kg, 2kg, 5kg & 10kg
- Optional Motorized Probes: .30kg, .80kg, & 1kgf
- Available Impact Devices (Leeb) D, DC, D+15, G & DL
MEASURING METHOD: UCI & Leeb Portable Hardness Testers
There are two basic methods of portable hardness testing that is accepted in the field today.
“Ultrasonic Contact Impedance” is based on a 136 degree diamond at the end of a vibrating rod being depressed into the test surface at a fixed load. The difference in Ultrasonic vibration frequency is then calculated into a hardness value. The UCI hardness test procedure is slower than the Dynamic Impact style, however the “UCI” method of hardness testing is portable, easy and accurate. It also has its own advantages when utilized for certain hardness testing applications. UCI hardness testers are not restricted to large mass items like dynamic type testers. These hardness testers can test metals as thin as 2mm and at a hardness value as low as 20HRC (75HB). They also excel at performing hardness tests on larger, harder metals as well. Another reason for the rise in popularity is due to the fact that the UCI method is categorized as “Non-Destructive”. That translates into less scrap parts/ lower mfg costs due to necessary inspections.
“Dynamic Impact” is based on the Leeb principle of hardness developed by Dietmar Leeb in the 1970’s. A spring loaded impact body is thrust to the test surface, effecting rebound. The speed of both the initial thrust and the rebound is measured in a non-contact mode. This is calculated as a Leeb hardness value and then automatically converted to Rockwell C, B, Brinell, Vickers and Shore hardness Values. It has effectually brought easy, fast and accurate results to portable hardness testing.
UCI Portable Hardness testers
Scales-UCI Measurement Range Tolerance Rockwell C
Rockwell B20-70 HRC
41-99 HRB+/- 1.5 HRC
+/-1.5 HRBRockwell A 61-85 HRB +/-1.5 HRA Brinell
Vickers76-618 HB
80-1599 HV+/- 3% HB
+/- 3% HVCan also test in the following scales(UCI only) HRN15 – HRN30 – HRN45 – HRT15 – HRT30 – HRT45 HRF – HK – HD.
LEEB Portable Hardness Testers
Scales-UCI Measurement Range Tolerance Rockwell C
Rockwell B25-67 HRC
59-99 HRB+/- 1.5 HRC
+/-1.5 HRBBrinell 85-651 HB +/- 10 HB Vickers
Shore83-976 HV
26-99HS+/- 12 HV
+/-10HSLeeb 170-960HLD +/- 6HL UCI portable hardness tester w/manual probe
Model No. Description Application Notes PHT-6001 UCI Portable Hardness Tester w/1kgf Probe For surfaces with Ra below 125μin PHT-6002 UCI Portable Hardness Tester w/2kgf Probe For surfaces with Ra below 200μin PHT-6005 UCI Portable Hardness Tester w/5kgf Probe For surfaces with Ra below 400μin PHT-6010 UCI Portable Hardness Tester w/10kgf Probe For surfaces with Ra below 600μin UCI portable hardness tester w/motorized probe
Model No. Description Application Notes PHT-6030 UCI Portable Hardness Tester w/.30kgf Probe Best for checking coating layer hardness; Finished thin parts PHT-6080 UCI Portable Hardness Tester w/.80kgf Probe Best for smooth bearing type surfaces PHT-6100 UCI Portable Hardness Tester w/1kgf Probe Best for machined surfaces Specifications:
Hardness Range
Scale Selection
Tolerance
Display TypeHRC: 20.3- 70; HRB: 61-85.6 ; HV: 80-1599; HB: 76-618
Rockwell C (HRC); Rockwell B (HRB); Rockwell A (HRA); Brinell (HB); Vickers (HV); Leeb (HLD) and many more!
+/- 3.0% deviation of average from the reference value of the hardness test block with a minimum of 5 tests
LCD Color Screen w/Backlight, adjustable brightnessLanguage Selection
Data Logger
Data MemoryEnglish, German, Chinese, Spanish, etc.
Letters, Numerals
2000 groups of measured data ; 20 groups of calibration dataStatistical Software
Data OutputSupplied-can be saved in Word or Excel
USB cable suppliedPower Supply
Auto Power OffRechargeable Lithium Battery: Voltage-4.2V, 4800mAh
5 minutesRecharging Time
Battery UsageApprox. 8 hours
Approx. 6 hours (no backlight)Net Weight(base unit)
Gross Weight2lbs (w/probe)
12 lbsUnit Dimensions
Gross Dimensions7.0 x 3.1 x 1.1"(160x80x30mm)
13.7 x 17.7 x 5.9"(350x450x150mm)Manual UCI Probe Specifications:
Probe Type/Model PHT-6001 PHT-6002 PHT-6005 PHT-6010 Loading Force 1kgf (10N) 2kg (20N) 5kg (50N) 10kg (98N) Probe Diameter
Length
Oscillating Rod Diameter22mm
154mm
2.4mm22mm
154mm
2.4mm22mm
154mm
3mm22mm
154mm
3mmSurface Roughness Requirements
?m=Metric ?in= InchRa<3.2μm
(Ra<125μin)Ra<5μm
(Ra<197μin)Ra<10μm
(Ra<393μin)Ra<15μm
(Ra<590μin)Min weight of test sample
Minimum thickness of sample0.3kg (.66lbs)
2mm (.08")0.3kg (.66lbs)
2mm (.08")0.3kg (.66lbs)
2mm (.08")0.3kg (.66lbs)
2mm (.08")
Motorized UCI Probe Specifications:
Probe Type/Model PHT-6030 PHT-6080 PHT-6100 Loading Force .30kg (3N) .80kg (8N) 1kgf (10N) Probe Diameter 46mm 46mm 46mm Length 198mm 198mm 198mm Oscillating Rod Diameter 3.7mm 3.7mm 3.7mm Surface Roughness Ra<3.2 μm Ra<5 μm Ra<8 μm Requirements
?m=Metric ?in= Inch(Ra<125 μin) (Ra<197 μin) (Ra<314 μin) Min weight of test sample 0.3kg (.66lbs) 0.3kg (.66lbs) 0.3kg (.66lbs) Minimum thickness of sample 2mm (.08") 2mm (.08") 2mm (.08") 
Indentation Depth (?m)
Hardness .30kg Motorized .80kg Motorized 1kg Motorized 1kg Manual 2kg Manual 5kg Manual 10kg Manual 800HV 4 5 7 7 10 15 22 600HV 4 5 8 8 11 18 25 500HV 5 6 9 9 12 19 27 300HV 6 8 11 11 16 25 35 100HV 10 13 19 19 27 43 61 OPTIONAL ACCESSORIES:
Special Application Impact Devices
Impact Device D Part No. PHT1800-100
Universal standard device:Use for the majority of hardness testing assignments
Impact Device DL Part No. PHT1800-115
Tip 4mm diameter x 1.96" length Measurements in extremely confined spaces
Impact Device G Part No. PHT1800-125
Enlarged test tip:For use on solid heavy components such as; rough castings and forgings. Brinell only.
Impact Device DC Part No. PHT1800-120
Extremely short impact deviceUsed for very confined spaces such as holes, cylinders, internal measurements
Impact Device D+15 Part No. PHT1800-110
Slim front section with coil set backHardness measurements in grooves, recessed surface
Impact Device C Part No. PHT1800-130
Reduced impact energyFor testing case hardened material
Support StandPart No. MET-1000
Small Cylinder Support Ring(8-22mm diameter)Part No. PHT6000-521
CYLINDER SUPPORT for MOTORIZED PROBEPart No. PHT6000-751
Deep Hole Probe Cap(5.53mm diameter/15.5 deep)Part No. PHT6000-541
Optional Hardness Test Blocks for 6000 Series
NIST Certified Hardness Test Block Kit
Part No. 900330-9410
Includes: 1pc HRC 20’s
1pc HRC 40’s
1pc HRC 60’sFull form cert for each block
Aluminum/Brass Rockwell Blocks
Part No. Description Shape Range Comments 900330-9414AH Rockwell B Square 80’s Made in USA Aluminum 900330-9414AL Rockwell B Square 50’s Made in USA Aluminum 900330-9418H Rockwell E Square 90’s Made in USA Aluminum 900330-9418L Rockwell E Square 60’s Made in USA Aluminum 900330-9414BH Rockwell B Square 80’s Made in USA Brass 900330-9414BL Rockwell B Square 50’s Made in USA Brass 
Leeb Hardness Test Blocks
Part No. Description Shape Range Comments PHT1300-01 Leeb “D" Hardness Test Block Round 750-800(HRC 50’s) Phase II std. PHT130001-cert Leeb “D" Hardness Test Block Round 750-800(HRC 50’s) NIST Certified PHT1300-02 Leeb “D" Hardness Test Block Round 590-670(HRC40’s) Phase II std. PHT130002-cert Leeb “D" Hardness Test Block Round 590-670(HRC40’s) NIST Certified PHT1300-03 Leeb “D" Hardness Test Block Round 590-670(HRC40’s) Phase II std. PHT130003-cert Leeb “D" Hardness Test Block Round 490-570(HRC20’s) NIST Certified PHT1100G-01 Leeb “G" Hardness Test Block Round 480-670 For use with “G" impact devices PHT1100G-01C Leeb “G" Hardness Test Block ASTM Certified to Brinell Round 480-670 (HB200’s) For use with “G" impact devices 
Brinell Hardness Test Blocks
Part No. Description Shape Range Comments 900355-1000/150 3000kg Round 150-250 Phase II std. (Steel) 900355-1000/250 3000kg Round 250-500 Phase II std. (Steel) 900355-3010 3000kg Rectangle Low Aluminum (USA) 900355-3020 3000kg Rectangle High Aluminum (USA) 900355-3030 3000kg Rectangle 100-200HB Steel (USA) 900355-3040 3000kg Rectangle 250-350HB Steel (USA) 900355-3050 3000kg Rectangle 500+HB Steel (USA) 
HARDNESS TESTER RESOURCES
