3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
Roll over image to zoom in
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
3 inch Cutting Diameter x 6-1/4'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6908
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
2-1/2'' Cutting Diameter by 6-1/8'' Oal 90 Degree R8 Shank Indexable End Mill with 6 Apkt1604 Carbide Inserts, 0028-6907
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts
90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts

90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts

NORTHWARDSKU: 0028-6908
Cutter Diameter: 3" (0028-6908)
Price:
$208.00

Shipping calculated at checkout

Stock:
In stock

California Proposition 65 Warning

Payment & Security

Payment methods

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Security

Estimate shipping

Description

90 Degree R8 Shank Indexable End Mills with APKT1604 Carbide Inserts

  • Shank size: R8 shank.
  • R8 shank threading: 7/16"-20
  • Reduces cutting forces
  • Maximum rigidity.
  • Forged steel body.
  • Each cutter is provided with 1 key and a set of locking screw.
  • APKT1604 carbide inserts are installed already. ( Prices including APKT1604 insert).
Tool angles
  • Cutting rake angle: 11° to 13°
  • Radial rake angle: 11° to 13°
  • Axial rake angle: 6° to 10°
  • Setting angle: 90°
Item Cutter Dia. Oal No of Insert Insert Screw
0028-6903 1" 5-27/32" 2 APKT1604 M4 x 8
0028-6904 1-1/4" 5-27/32" 3 APKT1604 M4 x 8
0028-6905 1-1/2" 6-1/8" 4 APKT1604 M4 x 8
0028-6906 2" 6-1/8" 5 APKT1604 M4 x 8
0028-6907 2-1/2" 6-1/8" 6 APKT1604 M4 x 8
0028-6908 3" 6-1/4" 6 APKT1604 M4 x 10

 

Recommended Cutting Speed - For reference only:

V= Cutting Speed (ft/min)
f= Feed per tooth (inch/Z)
ae=Cutting width

 

 

Item No. Description Materials Hardness(HB) Cutting parameter    
  R8 Shank Indexable End Mill , 90GEGREE   V(ft /min) f(inch/Z) ae RPM(n/min)
               
0028-6903 1"   Low-carbon Steel ≤180 197 - 393 0.002 - 0.004 ≤0.5D 750
    High-carbon Steel, Alloy Steel 180-280 197 - 393 0.002 - 0.004 ≤0.5D 750
    Tool Steel 280-350 164 - 295 0.002 - 0.004 ≤0.5D 600
               
               
0028-6904 1-1/4" Low-carbon Steel ≤180 197 - 393 0.002 - 0.004 ≤0.5D 600
    High-carbon Steel, Alloy Steel 180-280 197 - 393 0.002 - 0.004 ≤0.5D 600
    Tool Steel 280-350 164 - 295 0.002 - 0.004 ≤0.5D 500
               
0028-6905 1-1/2" Low-carbon Steel ≤180 197 - 393 0.002 - 0.004 ≤0.5D 500
    High-carbon Steel, Alloy Steel 180-280 197 - 393 0.002 - 0.004 ≤0.5D 500
    Tool Steel 280-350 164 - 295 0.002 - 0.004 ≤0.5D 400
               
               
0028-6906 2” Low-carbon Steel ≤180 197 - 393 0.002 - 0.004 ≤0.5D 350
    High-carbon Steel, Alloy Steel 180-280 197 - 393 0.002 - 0.004 ≤0.5D 350
    Tool Steel 280-350 164 - 295 0.002 - 0.004 ≤0.5D 350
               
0028-6907 2-1/2“ Low-carbon Steel ≤180 197 - 393 0.002 - 0.004 ≤0.5D 300
    High-carbon Steel, Alloy Steel 180-280 197 - 393 0.002 - 0.004 ≤0.5D 300
    Tool Steel 280-350 164 - 295 0.002 - 0.004 ≤0.5D 250
               
0028-6908 3" Low-carbon Steel ≤180 197 - 393 0.002 - 0.004 ≤0.5D 250
    High-carbon Steel, Alloy Steel 180-280 197 - 393 0.002 - 0.004 ≤0.5D 250
    Tool Steel 280-350 164 - 295 0.002 - 0.004 ≤0.5D 200


About the brand NORTHWARD:

  • NORTHWARD is the brand owned by Accusize Industrial Tools.
  • All the premium cutting tools supplied by Accusize Industrial Tools carry the brand, NORTHWARD.
  • The title of the listing still starts with "AccusizeTools", the actual brand of the item is NORTHWARD.

0056-0913-n.jpg

 

You may also like

Recently viewed