CAT50-ER40 6" Collet Chuck & ER40 23ps/set Metric Collet Set, Range: 4-26mm

Accusize Industrial ToolsSKU: CT5040E6-33500586


Shipping calculated at checkout

In stock

California Proposition 65 Warning

Payment & Security

Payment methods

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Estimate shipping


4 mm to 26mm by 1mm ER-40 Collet 23 Pcs/Set in Fitted Strong Alu Box, #3350-0586

  • Size from 4 mm to 26 mm by 1 mm
  • Total 23 ps/set
  • Features
    • Range of 0.039''
    • Made from alloy spring steel and hardened to HRC 44-48
    • All collets are checked its runout individually on 4 points on a testing rod
    • For size 3.0mm and larger the runout is 0.0003'' (0.008mm)
  • Under size 3.0mm the runout is 0.00059'' (0.015mm)
  • In fitted strong Aluminium Box

CAT50 ER40 V-Flange Collet Chuck Projection Length 6" Range 1/8" - 1", #CT50-40E6

  • Constructed of alloy steel for long, durable service life
  • Hardened to HRC 52-56 to avoid damaging collet chuck threads
  • Through-Spindle coolant capability
  • Collet seat taper TIR < 0.0002''
  • For ER40 Collet
  • Taper: CAT50
  • Projection Length: 6''
  • Range: 1/8 to 1''
  • All critical surface are precision ground
  • Packed in Fitted Box

Design, Assemble, and Dissemble of ER Collet Nut

Eccentric Design, ISO 15488:2003(E), Accusize ER Collet Chuck Nut
Assemble Accusize ER Collet Nut
Inspection of Accusize ER Collet Chuck and Nut
Dissemble Accusize ER Collet Nut
Eccentric Design, ISO 15488:2003(E) Assemble Inspection Dissemble
The inside of the ER collet nut is intentionally designed like off-centering to help mount the ER collet much easier. It is in accordance with the requirements listed in ISO 15488:2003(E). If it is made symmetrical, the ER collet with the diameter larger than the inside size of the collet nut cannot be installed. Insert the ER collet into the nut at an angle. Lock it onto the eccentric groove of the collet nut and push it in. (Insert the cutter right after the step, before connect it to the holder/chuck/arbor.)

Inspect the RPM of the ER collet, ER collet nut, ER collet holder/chuck/arbor, etc. Take out the tool bit, press the end of the ER collet until the collet off the position. Push it out of the nut. (after take out the nut out of the holder.)

You may also like

Recently viewed